Discussion:
Android x86 ICS - T101mt
(too old to reply)
Norbert x
2012-02-16 19:31:45 UTC
Permalink
Hello!

I have same problems with my T101MT (Atom N570).
I tried many ICS builds: android-x86-4.0-eeepc-20120101.iso, android-
x86-4.0-eeepc-20111225.iso, android-x86-4.0-asus_laptop-20120101.iso,
android-x86-4.0-asus_laptop-20111225.iso, android-x86-4.0-
eeepc-20111209.iso.
Wi-Fi is not working (as in #557, #620, #621, #659, #667, #686). I
tried to switch it on/off from BIOS with no luck.

As a linux user I know about iwconfig, iwlist and rfkill. An android
alternative for them is "network stack". I do not how to toggle wi-fi
with it.
According to lcpci my wi-fi card is (from Ubuntu 11.04):
02:00.0 Network controller: Atheros Communications Inc. AR9285
Wireless Network Adapter (PCI-Express) (rev 01).
How can I help developers to solve the problem?

As temporary solution this works for me (http://code.google.com/p/
android-x86/issues/detail?id=495#c22):
After booting android-x86-4.0-asus_laptop-20120101 (installed on a usb
stick), I start Terminal and enter:
su
chmod -R /data
For the WiFi issue, not all Wireless cards are supported. I know that
mine is a AR5B95 Half Height and WiFi works out of box.
Sometimes you can change WiFi cards on the laptops but you MUST make
sure the replacement is branded for your laptop. Ie; make sure you
replace your HP's WiFi card with a HP card. If you try card from say
Dell it won't work.
Hi everyone,
I'm really disappointed because also this new release doesn't allow me
to connect through wifi to any network on myt101mt...
Another issue, is that it does not remeber the changes made to the
widgets...
I really like your great work and i i'd really like to help you to
make android x86 work onT101mt, which would be a perfect android
tablet!
I have some knowledge about linux but i don't know a lot about
android...
So if someone can point me in the right direction, i would like to
investigate, first of all, in the wifi issue, and then in the minor
issues...
Any help would be much appreciated!!
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+***@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
Norbert x
2012-02-16 19:32:23 UTC
Permalink
Hello!

I have same problems with my T101MT (Atom N570).
I tried many ICS builds: android-x86-4.0-eeepc-20120101.iso, android-
x86-4.0-eeepc-20111225.iso, android-x86-4.0-asus_laptop-20120101.iso,
android-x86-4.0-asus_laptop-20111225.iso, android-x86-4.0-
eeepc-20111209.iso.
Wi-Fi is not working (as in #557, #620, #621, #659, #667, #686). I
tried to switch it on/off from BIOS with no luck.

As a linux user I know about iwconfig, iwlist and rfkill. An android
alternative for them is "network stack". I do not how to toggle wi-fi
with it.
According to lcpci my wi-fi card is (from Ubuntu 11.04):
02:00.0 Network controller: Atheros Communications Inc. AR9285
Wireless Network Adapter (PCI-Express) (rev 01).
How can I help developers to solve the problem?

As temporary solution this works for me (http://code.google.com/p/
android-x86/issues/detail?id=495#c22):
After booting android-x86-4.0-asus_laptop-20120101 (installed on a usb
stick), I start Terminal and enter:
su
chmod -R /data
For the WiFi issue, not all Wireless cards are supported. I know that
mine is a AR5B95 Half Height and WiFi works out of box.
Sometimes you can change WiFi cards on the laptops but you MUST make
sure the replacement is branded for your laptop. Ie; make sure you
replace your HP's WiFi card with a HP card. If you try card from say
Dell it won't work.
Hi everyone,
I'm really disappointed because also this new release doesn't allow me
to connect through wifi to any network on myt101mt...
Another issue, is that it does not remeber the changes made to the
widgets...
I really like your great work and i i'd really like to help you to
make android x86 work onT101mt, which would be a perfect android
tablet!
I have some knowledge about linux but i don't know a lot about
android...
So if someone can point me in the right direction, i would like to
investigate, first of all, in the wifi issue, and then in the minor
issues...
Any help would be much appreciated!!
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+***@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
O S
2012-02-16 22:26:30 UTC
Permalink
Hi.

The problem has been identified. It is the 3-tslib script that runs at each
boot and change the attributes of the /data directory. A patch has been
relased but you have either to build the iso yourself from the source or
wait for the next release.
Here is a temporary solution that you should apply at each reboot to make
wifi and other apps work :

1- reboot in debug mode
2- once on shell type chmod -R 777 data
3- type exit --> boot process continue
4- type exit (another time)
5- enjoy

Wahid.

Sent from my galaxy ace.
Post by Norbert x
Hello!
I have same problems with my T101MT (Atom N570).
I tried many ICS builds: android-x86-4.0-eeepc-20120101.iso, android-
x86-4.0-eeepc-20111225.iso, android-x86-4.0-asus_laptop-20120101.iso,
android-x86-4.0-asus_laptop-20111225.iso, android-x86-4.0-
eeepc-20111209.iso.
Wi-Fi is not working (as in #557, #620, #621, #659, #667, #686). I
tried to switch it on/off from BIOS with no luck.
As a linux user I know about iwconfig, iwlist and rfkill. An android
alternative for them is "network stack". I do not how to toggle wi-fi
with it.
02:00.0 Network controller: Atheros Communications Inc. AR9285
Wireless Network Adapter (PCI-Express) (rev 01).
How can I help developers to solve the problem?
As temporary solution this works for me (http://code.google.com/p/
After booting android-x86-4.0-asus_laptop-20120101 (installed on a usb
su
chmod -R /data
For the WiFi issue, not all Wireless cards are supported. I know that
mine is a AR5B95 Half Height and WiFi works out of box.
Sometimes you can change WiFi cards on the laptops but you MUST make
sure the replacement is branded for your laptop. Ie; make sure you
replace your HP's WiFi card with a HP card. If you try card from say
Dell it won't work.
Hi everyone,
I'm really disappointed because also this new release doesn't allow me
to connect through wifi to any network on myt101mt...
Another issue, is that it does not remeber the changes made to the
widgets...
I really like your great work and i i'd really like to help you to
make android x86 work onT101mt, which would be a perfect android
tablet!
I have some knowledge about linux but i don't know a lot about
android...
So if someone can point me in the right direction, i would like to
investigate, first of all, in the wifi issue, and then in the minor
issues...
Any help would be much appreciated!!
--
You received this message because you are subscribed to the Google Groups
"Android-x86" group.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+***@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
O S
2012-02-18 06:33:38 UTC
Permalink
Did it work?
Post by O S
Hi.
The problem has been identified. It is the 3-tslib script that runs at
each boot and change the attributes of the /data directory. A patch has
been relased but you have either to build the iso yourself from the source
or wait for the next release.
Here is a temporary solution that you should apply at each reboot to make
1- reboot in debug mode
2- once on shell type chmod -R 777 data
3- type exit --> boot process continue
4- type exit (another time)
5- enjoy
Wahid.
Sent from my galaxy ace.
Post by Norbert x
Hello!
I have same problems with my T101MT (Atom N570).
I tried many ICS builds: android-x86-4.0-eeepc-20120101.iso, android-
x86-4.0-eeepc-20111225.iso, android-x86-4.0-asus_laptop-20120101.iso,
android-x86-4.0-asus_laptop-20111225.iso, android-x86-4.0-
eeepc-20111209.iso.
Wi-Fi is not working (as in #557, #620, #621, #659, #667, #686). I
tried to switch it on/off from BIOS with no luck.
As a linux user I know about iwconfig, iwlist and rfkill. An android
alternative for them is "network stack". I do not how to toggle wi-fi
with it.
02:00.0 Network controller: Atheros Communications Inc. AR9285
Wireless Network Adapter (PCI-Express) (rev 01).
How can I help developers to solve the problem?
As temporary solution this works for me (http://code.google.com/p/
android-x86/issues/detail?id=495#c22<http://code.google.com/p/android-x86/issues/detail?id=495#c22>
After booting android-x86-4.0-asus_laptop-20120101 (installed on a usb
su
chmod -R /data
For the WiFi issue, not all Wireless cards are supported. I know that
mine is a AR5B95 Half Height and WiFi works out of box.
Sometimes you can change WiFi cards on the laptops but you MUST make
sure the replacement is branded for your laptop. Ie; make sure you
replace your HP's WiFi card with a HP card. If you try card from say
Dell it won't work.
Hi everyone,
I'm really disappointed because also this new release doesn't allow me
to connect through wifi to any network on myt101mt...
Another issue, is that it does not remeber the changes made to the
widgets...
I really like your great work and i i'd really like to help you to
make android x86 work onT101mt, which would be a perfect android
tablet!
I have some knowledge about linux but i don't know a lot about
android...
So if someone can point me in the right direction, i would like to
investigate, first of all, in the wifi issue, and then in the minor
issues...
Any help would be much appreciated!!
--
You received this message because you are subscribed to the Google Groups
"Android-x86" group.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+***@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
Norbert x
2012-02-18 10:18:06 UTC
Permalink
Now I use android-x86-4.0-asus_laptop-20111209.iso version.
In my previous message I forgot about 777.

Your method does not work. After booting in debug mode (steps 1-5),
WiFi switch in Settings menu become movable, but network list in the
right is clear.
So as a temporary solution I do the folowing:
1. Open Terminal Emulator
2. type su
3. type chmod -R 777 /data.
I do this way on each boot.

I think you method is not working because of init.rc script. May be it
override the 1-5 steps?
I'll try the latest version 20120101.
Post by O S
Did it work?
Post by O S
Hi.
The problem has been identified. It is the 3-tslib script that runs at
each boot and change the attributes of the /data directory. A patch has
been relased but you have either to build the iso yourself from the source
or wait for the next release.
Here is a temporary solution that you should apply at each reboot to make
1- reboot in debug mode
2- once on shell type chmod -R 777 data
3- type exit --> boot process continue
4- type exit (another time)
5- enjoy
Wahid.
Sent from my galaxy ace.
Post by Norbert x
Hello!
I have same problems with my T101MT (Atom N570).
I tried many ICS builds: android-x86-4.0-eeepc-20120101.iso, android-
x86-4.0-eeepc-20111225.iso, android-x86-4.0-asus_laptop-20120101.iso,
android-x86-4.0-asus_laptop-20111225.iso, android-x86-4.0-
eeepc-20111209.iso.
Wi-Fi is not working (as in #557, #620, #621, #659, #667, #686). I
tried to switch it on/off from BIOS with no luck.
As a linux user I know about iwconfig, iwlist and rfkill. An android
alternative for them is "network stack". I do not how to toggle wi-fi
with it.
02:00.0 Network controller: Atheros Communications Inc. AR9285
Wireless Network Adapter (PCI-Express) (rev 01).
How can I help developers to solve the problem?
As temporary solution this works for me (http://code.google.com/p/
android-x86/issues/detail?id=495#c22<http://code.google.com/p/android-x86/issues/detail?id=495#c22>
After booting android-x86-4.0-asus_laptop-20120101 (installed on a usb
su
chmod -R /data
For the WiFi issue, not all Wireless cards are supported. I know that
mine is a AR5B95 Half Height and WiFi works out of box.
Sometimes you can change WiFi cards on the laptops but you MUST make
sure the replacement is branded for your laptop. Ie; make sure you
replace your HP's WiFi card with a HP card. If you try card from say
Dell it won't work.
Hi everyone,
I'm really disappointed because also this new release doesn't allow me
to connect through wifi to any network on myt101mt...
Another issue, is that it does not remeber the changes made to the
widgets...
I really like your great work and i i'd really like to help you to
make android x86 work onT101mt, which would be a perfect android
tablet!
I have some knowledge about linux but i don't know a lot about
android...
So if someone can point me in the right direction, i would like to
investigate, first of all, in the wifi issue, and then in the minor
issues...
Any help would be much appreciated!!
--
You received this message because you are subscribed to the Google Groups
"Android-x86" group.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+***@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
O S
2012-02-19 08:29:05 UTC
Permalink
You're right !
the chmod command should be entered in the second shell in my method (after
the first 'exit'). The 20120101 build has the same problem since the
3-tslib file was not corrected yet.
I rebuild the iso from fresh sources and now it's ok. However the web
navigator still presents some problems.

Wahid.
Post by Norbert x
Now I use android-x86-4.0-asus_laptop-20111209.iso version.
In my previous message I forgot about 777.
Your method does not work. After booting in debug mode (steps 1-5),
WiFi switch in Settings menu become movable, but network list in the
right is clear.
1. Open Terminal Emulator
2. type su
3. type chmod -R 777 /data.
I do this way on each boot.
I think you method is not working because of init.rc script. May be it
override the 1-5 steps?
I'll try the latest version 20120101.
Post by O S
Did it work?
Post by O S
Hi.
The problem has been identified. It is the 3-tslib script that runs at
each boot and change the attributes of the /data directory. A patch has
been relased but you have either to build the iso yourself from the
source
Post by O S
Post by O S
or wait for the next release.
Here is a temporary solution that you should apply at each reboot to
make
Post by O S
Post by O S
1- reboot in debug mode
2- once on shell type chmod -R 777 data
3- type exit --> boot process continue
4- type exit (another time)
5- enjoy
Wahid.
Sent from my galaxy ace.
Post by Norbert x
Hello!
I have same problems with my T101MT (Atom N570).
I tried many ICS builds: android-x86-4.0-eeepc-20120101.iso, android-
x86-4.0-eeepc-20111225.iso, android-x86-4.0-asus_laptop-20120101.iso,
android-x86-4.0-asus_laptop-20111225.iso, android-x86-4.0-
eeepc-20111209.iso.
Wi-Fi is not working (as in #557, #620, #621, #659, #667, #686). I
tried to switch it on/off from BIOS with no luck.
As a linux user I know about iwconfig, iwlist and rfkill. An android
alternative for them is "network stack". I do not how to toggle wi-fi
with it.
02:00.0 Network controller: Atheros Communications Inc. AR9285
Wireless Network Adapter (PCI-Express) (rev 01).
How can I help developers to solve the problem?
As temporary solution this works for me (http://code.google.com/p/
android-x86/issues/detail?id=495#c22<
http://code.google.com/p/android-x86/issues/detail?id=495#c22>
Post by O S
Post by O S
Post by Norbert x
After booting android-x86-4.0-asus_laptop-20120101 (installed on a usb
su
chmod -R /data
For the WiFi issue, not all Wireless cards are supported. I know
that
Post by O S
Post by O S
Post by Norbert x
mine is a AR5B95 Half Height and WiFi works out of box.
Sometimes you can change WiFi cards on the laptops but you MUST make
sure the replacement is branded for your laptop. Ie; make sure you
replace your HP's WiFi card with a HP card. If you try card from say
Dell it won't work.
Hi everyone,
I'm really disappointed because also this new release doesn't
allow me
Post by O S
Post by O S
Post by Norbert x
to connect through wifi to any network on myt101mt...
Another issue, is that it does not remeber the changes made to the
widgets...
I really like your great work and i i'd really like to help you to
make android x86 work onT101mt, which would be a perfect android
tablet!
I have some knowledge about linux but i don't know a lot about
android...
So if someone can point me in the right direction, i would like to
investigate, first of all, in the wifi issue, and then in the
minor
Post by O S
Post by O S
Post by Norbert x
issues...
Any help would be much appreciated!!
--
You received this message because you are subscribed to the Google
Groups
Post by O S
Post by O S
Post by Norbert x
"Android-x86" group.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups
"Android-x86" group.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+***@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
Norbert x
2012-02-19 11:22:22 UTC
Permalink
Hello, Wahid!

I tried you method on 20120101 asus_laptop at its fresh state (on
first boot after installation) and on next boots witho no luck. It
seems that init.rc runs after second shell. So the "/data" directory
has rights 771 on entering at graphical mode. As before WiFi switch
become movable, but there are no networks in the list.

I grep'ed the "init.rc" file and discovered that changing rights only
for "data/system/wpa_supplicant/" and "data/misc/wifi/" solves the Wi-
Fi problem. So i'm doing this way:
1. Start Terminal Emulator
2. chmod -R 777 data/system/wpa_supplicant/ data/misc/wifi/


How I can add this line to the script, which will execute on each
graphical boot. Is there ".bashrc" or somethihg? I found /etc/mkshrc
but it is not writable.
O S
2012-02-24 21:03:17 UTC
Permalink
Hi Norbert,

As you, I tried many methods to make the procedure execute automatically on
each boot, but I couldn't succeed.
it's like the init.rc and the 3-tslib.sh files are recreated at each run.
so il left this solution and opted for a self build of the iso.

The compilation process is extremely long, and the two builds I made from
fresh code (repo sync), solve the problem of wifi connection; but other
problems exist, like the browser that doesn't load and most applications
crash after the first reboot.

i found that some people are making iso every day from the last patches and
codes;
here is the link if you're interested :
http://tabletsx86.org/CYNEW-UPDATED-BUILDS.htm

i'm downloading right now the *
android-x86-4.0-eeepc-20120222.iso<http://www.mediafire.com/download.php?uxq16cj9a0k2k26>
* and i'll try it;

I'll tell you if it's ok or not.
Post by Norbert x
Hello, Wahid!
I tried you method on 20120101 asus_laptop at its fresh state (on
first boot after installation) and on next boots witho no luck. It
seems that init.rc runs after second shell. So the "/data" directory
has rights 771 on entering at graphical mode. As before WiFi switch
become movable, but there are no networks in the list.
I grep'ed the "init.rc" file and discovered that changing rights only
for "data/system/wpa_supplicant/" and "data/misc/wifi/" solves the Wi-
1. Start Terminal Emulator
2. chmod -R 777 data/system/wpa_supplicant/ data/misc/wifi/
How I can add this line to the script, which will execute on each
graphical boot. Is there ".bashrc" or somethihg? I found /etc/mkshrc
but it is not writable.
--
You received this message because you are subscribed to the Google Groups
"Android-x86" group.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
Norbert x
2012-02-25 10:57:55 UTC
Permalink
Hello!

I just compiled ICS-4.0.3 version from sources at 20120224.
Compilation is no problem for me with i7-920 and 6 Gb RAM.
Almost everything works great:
+ Wi-Fi works at every boot without any hacks;
+ Camera works (but it's upside down, it is known issue -
https://help.ubuntu.com/community/T101MT#If_The_Camera_Is_Up-side_Down);
+ Brightness control from GUI works (brightness changes on slider
move);
+ Suspend and wakeup works.

Browser and other apps works without crashes. There is no Android
Market, I don't know how to add it.
You can download it for testing from the link:
https://rapidshare.com/files/1884108854/asus_laptop.iso (MD5 is
94398d2e58a3862d7d024ae63db82767).

Thank you for the link. I also tested android-x86-4.0-
asus_laptop-20120222.iso from tabletsx86, results are similar. No
Market. And no suspend, Terminal Emulator not working.
O S
2012-02-25 18:02:31 UTC
Permalink
Great Job !!!

Guess what ? I tried to compile ICS on my t101mt ... it took me 2 days !!!
(repo + compilation).
but the result is pretty good, so I deleted everything on my other computer
(Dual core + 2 GO RAM) and I'm restarting everything and trying to add
google apps.

Try to follow this link to add the market and the google account + setup to
your ICS build :
http://groups.google.com/group/android-x86/browse_thread/thread/d759fede6d6fa56e?pli=1

I tried it but couldn't make the setup run automatically at the first
install (you'll be asked to choose among another application).
i'm gonna work on it a bit this week end, if you succeed to make a final
image with what is working now + google account and google maket the let me
know.

Since the kernel is OK now, we should recompile with the existing kernel
option (it should be faster).

Wahid.
Post by Norbert x
Hello!
I just compiled ICS-4.0.3 version from sources at 20120224.
Compilation is no problem for me with i7-920 and 6 Gb RAM.
+ Wi-Fi works at every boot without any hacks;
+ Camera works (but it's upside down, it is known issue -
https://help.ubuntu.com/community/T101MT#If_The_Camera_Is_Up-side_Down);
+ Brightness control from GUI works (brightness changes on slider
move);
+ Suspend and wakeup works.
Browser and other apps works without crashes. There is no Android
Market, I don't know how to add it.
https://rapidshare.com/files/1884108854/asus_laptop.iso (MD5 is
94398d2e58a3862d7d024ae63db82767).
Thank you for the link. I also tested android-x86-4.0-
asus_laptop-20120222.iso from tabletsx86, results are similar. No
Market. And no suspend, Terminal Emulator not working.
--
You received this message because you are subscribed to the Google Groups
"Android-x86" group.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
O S
2012-02-26 17:54:43 UTC
Permalink
hi all,

Sorry, the link was too long :

Fully integrate *Google Apps* (Market, Gmail, etc.) in
ICS<http://groups.google.com/group/android-x86/browse_thread/thread/d759fede6d6fa56e/22a39a5d4f198276?lnk=gst&q=google+apps#22a39a5d4f198276>
Post by O S
Great Job !!!
Guess what ? I tried to compile ICS on my t101mt ... it took me 2 days
!!! (repo + compilation).
but the result is pretty good, so I deleted everything on my other
computer (Dual core + 2 GO RAM) and I'm restarting everything and trying to
add google apps.
Try to follow this link to add the market and the google account + setup
http://groups.google.com/group/android-x86/browse_thread/thread/d759fede6d6fa56e?pli=1
I tried it but couldn't make the setup run automatically at the first
install (you'll be asked to choose among another application).
i'm gonna work on it a bit this week end, if you succeed to make a final
image with what is working now + google account and google maket the let me
know.
Since the kernel is OK now, we should recompile with the existing kernel
option (it should be faster).
Wahid.
Post by Norbert x
Hello!
I just compiled ICS-4.0.3 version from sources at 20120224.
Compilation is no problem for me with i7-920 and 6 Gb RAM.
+ Wi-Fi works at every boot without any hacks;
+ Camera works (but it's upside down, it is known issue -
https://help.ubuntu.com/community/T101MT#If_The_Camera_Is_Up-side_Down);
+ Brightness control from GUI works (brightness changes on slider
move);
+ Suspend and wakeup works.
Browser and other apps works without crashes. There is no Android
Market, I don't know how to add it.
https://rapidshare.com/files/1884108854/asus_laptop.iso (MD5 is
94398d2e58a3862d7d024ae63db82767).
Thank you for the link. I also tested android-x86-4.0-
asus_laptop-20120222.iso from tabletsx86, results are similar. No
Market. And no suspend, Terminal Emulator not working.
--
You received this message because you are subscribed to the Google Groups
"Android-x86" group.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
Timothy Zhang
2012-02-29 04:45:20 UTC
Permalink
Hello,

After the installation of android-x86-4.0-RC1-eeepc.iso, I can't find
my SD card.
Only fake SD is available.
Taufik Ur Rahman
2012-02-29 05:00:55 UTC
Permalink
Maybe your Sd detect as USB check in \mnt\USB
Post by Norbert x
Hello,
After the installation of android-x86-4.0-RC1-eeepc.iso, I can't find
my SD card.
Only fake SD is available.
--
You received this message because you are subscribed to the Google Groups
"Android-x86" group.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
Chih-Wei Huang
2012-02-29 05:16:13 UTC
Permalink
Post by Timothy Zhang
After the installation of android-x86-4.0-RC1-eeepc.iso, I can't find
my SD card.
Only fake SD is available.
If you created fake sdcard, you can't use a real sdcard.
So don't create it unless you have no sdcard.
--
Chih-Wei
Android-x86 project
http://www.android-x86.org
Waheed
2012-02-25 19:02:38 UTC
Permalink
Great Job !!!

Guess what ? I tried to compile ICS on my t101mt ... it took me 2
days !!!
(repo + compilation).
but the result is pretty good, so I deleted everything on my other
computer
(Dual core + 2 GO RAM) and I'm restarting everything and trying to add
google apps.

Try to follow this link to add the market and the google account +
setup to
your ICS build :
http://groups.google.com/group/android-x86/browse_thread/thread/d759f...

I tried it but couldn't make the setup run automatically at the first
install (you'll be asked to choose among another application).
i'm gonna work on it a bit this week end, if you succeed to make a
final
image with what is working now + google account and google maket then
let me
know.
Post by Norbert x
Hello!
I just compiled ICS-4.0.3 version from sources at 20120224.
Compilation is no problem for me with i7-920 and 6 Gb RAM.
+ Wi-Fi works at every boot without any hacks;
+ Camera works (but it's upside down, it is known issue -https://help.ubuntu.com/community/T101MT#If_The_Camera_Is_Up-side_Down);
+ Brightness control from GUI works (brightness changes on slider
move);
+ Suspend and wakeup works.
Browser and other apps works without crashes. There is no Android
Market, I don't know how to add it.
You can download it for testing from the link:https://rapidshare.com/files/1884108854/asus_laptop.iso(MD5 is
94398d2e58a3862d7d024ae63db82767).
Thank you for the link. I also tested android-x86-4.0-
asus_laptop-20120222.iso from tabletsx86, results are similar. No
Market. And no suspend, Terminal Emulator not working.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+***@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
O S
2012-03-04 21:36:25 UTC
Permalink
Yes, as said , to turn off the system, you have to slide twice the power
button (the usual menu will then appear).

For wifi, I had no problem at all.

Can you see the wireless networks list?

sent from my asus t101mt - Android x86 RC1
Post by O S
Hi.
The problem has been identified. It is the 3-tslib script that runs at
each boot and change the attributes of the /data directory. A patch has
been relased but you have either to build the iso yourself from the source
or wait for the next release.
Here is a temporary solution that you should apply at each reboot to make
1- reboot in debug mode
2- once on shell type chmod -R 777 data
3- type exit --> boot process continue
4- type exit (another time)
5- enjoy
Wahid.
Sent from my galaxy ace.
Post by Norbert x
Hello!
I have same problems with my T101MT (Atom N570).
I tried many ICS builds: android-x86-4.0-eeepc-20120101.iso, android-
x86-4.0-eeepc-20111225.iso, android-x86-4.0-asus_laptop-20120101.iso,
android-x86-4.0-asus_laptop-20111225.iso, android-x86-4.0-
eeepc-20111209.iso.
Wi-Fi is not working (as in #557, #620, #621, #659, #667, #686). I
tried to switch it on/off from BIOS with no luck.
As a linux user I know about iwconfig, iwlist and rfkill. An android
alternative for them is "network stack". I do not how to toggle wi-fi
with it.
02:00.0 Network controller: Atheros Communications Inc. AR9285
Wireless Network Adapter (PCI-Express) (rev 01).
How can I help developers to solve the problem?
As temporary solution this works for me (http://code.google.com/p/
android-x86/issues/detail?id=495#c22<http://code.google.com/p/android-x86/issues/detail?id=495#c22>
After booting android-x86-4.0-asus_laptop-20120101 (installed on a usb
su
chmod -R /data
For the WiFi issue, not all Wireless cards are supported. I know that
mine is a AR5B95 Half Height and WiFi works out of box.
Sometimes you can change WiFi cards on the laptops but you MUST make
sure the replacement is branded for your laptop. Ie; make sure you
replace your HP's WiFi card with a HP card. If you try card from say
Dell it won't work.
Hi everyone,
I'm really disappointed because also this new release doesn't allow me
to connect through wifi to any network on myt101mt...
Another issue, is that it does not remeber the changes made to the
widgets...
I really like your great work and i i'd really like to help you to
make android x86 work onT101mt, which would be a perfect android
tablet!
I have some knowledge about linux but i don't know a lot about
android...
So if someone can point me in the right direction, i would like to
investigate, first of all, in the wifi issue, and then in the minor
issues...
Any help would be much appreciated!!
--
You received this message because you are subscribed to the Google Groups
"Android-x86" group.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+***@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
qu4zz4r
2012-02-29 14:17:57 UTC
Permalink
Hello,

I've installed tegav2_20120101 build on T101MT (1st revision, with N450 on
board) and it runs pretty well. Now I'm trying to run the new build RC1
(eeepc, asus_laptop) without installation from SD card and it sticks just
after booting. Just a black screen and nothing else. I've also tried tegav2
build - it boots to the OS, but then gets system UI force close.
Can I get any log files to attach them here?
Thanks!
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To view this discussion on the web visit https://groups.google.com/d/msg/android-x86/-/Egonk55w9eIJ.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
O S
2012-02-29 21:55:27 UTC
Permalink
Very good.
I've installed the new release (RC1 eeepc) ... and almost everything is
working !
- wifi fixed
- web browser loads correctly
- youtube is working
- apps no more crash after first reboot
- terminal ok ( it used to show a white screen when i made my own build)

however some minor not blocking issues :
- camera upside down
- phyisical keyboard doesn't switch to azerty (I'm french ) even though the
android one did
- and the most annoying one, the screen that doesn't return to the
landscape mode after an app turned it up to portrait mode (I had to install
from the market the 'Rotation Locker' app to manually restore the correct
mode

and does anyone know why the ethernet support has not been included knowing
that some patches exist for ics ?
can ADB be used with this release ?
Post by Norbert x
Hello,
I've installed tegav2_20120101 build on T101MT (1st revision, with N450 on
board) and it runs pretty well. Now I'm trying to run the new build RC1
(eeepc, asus_laptop) without installation from SD card and it sticks just
after booting. Just a black screen and nothing else. I've also tried tegav2
build - it boots to the OS, but then gets system UI force close.
Can I get any log files to attach them here?
Thanks!
--
You received this message because you are subscribed to the Google Groups
"Android-x86" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/android-x86/-/Egonk55w9eIJ.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+***@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
Gia90
2012-03-04 18:49:46 UTC
Permalink
O S do you manage to shutdown your pc? if i press the power button it
just locks but it won't turn off..
Another issue, i can't connect to my ap (no matter if wpa2, wpa or wep
security, and i also trid changing channel..)
Post by O S
Very good.
I've installed the new release (RC1 eeepc) ... and almost everything is
working !
- wifi fixed
- web browser loads correctly
- youtube is working
- apps no more crash after first reboot
- terminal ok ( it  used to show a white screen when i made my own build)
- camera upside down
- phyisical keyboard doesn't switch to azerty (I'm french ) even though the
android one did
- and the most annoying one, the screen that doesn't return to the
landscape mode after an app turned it up to portrait mode (I had to install
from the market the 'Rotation Locker' app to manually restore the correct
mode
and does anyone know why the ethernet support has not been included knowing
that some patches exist for ics ?
can ADB be used with this release ?
Post by Norbert x
Hello,
I've installed tegav2_20120101 build on T101MT (1st revision, with N450 on
board) and it runs pretty well. Now I'm trying to run the new build RC1
(eeepc, asus_laptop) without installation from SD card and it sticks just
after booting. Just a black screen and nothing else. I've also tried tegav2
build - it boots to the OS, but then gets system UI force close.
Can I get any log files to attach them here?
Thanks!
--
You received this message because you are subscribed to the Google Groups
"Android-x86" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/android-x86/-/Egonk55w9eIJ.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+***@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
Duarte Velez Grilo
2012-03-04 18:51:32 UTC
Permalink
Slide the power button twice and it'll show up the shut down menu.

-- Duarte
Post by Gia90
O S do you manage to shutdown your pc? if i press the power button it
just locks but it won't turn off..
Another issue, i can't connect to my ap (no matter if wpa2, wpa or wep
security, and i also trid changing channel..)
Post by O S
Very good.
I've installed the new release (RC1 eeepc) ... and almost everything is
working !
- wifi fixed
- web browser loads correctly
- youtube is working
- apps no more crash after first reboot
- terminal ok ( it  used to show a white screen when i made my own build)
- camera upside down
- phyisical keyboard doesn't switch to azerty (I'm french ) even though the
android one did
- and the most annoying one, the screen that doesn't return to the
landscape mode after an app turned it up to portrait mode (I had to install
from the market the 'Rotation Locker' app to manually restore the correct
mode
and does anyone know why the ethernet support has not been included knowing
that some patches exist for ics ?
can ADB be used with this release ?
Post by Norbert x
Hello,
I've installed tegav2_20120101 build on T101MT (1st revision, with N450 on
board) and it runs pretty well. Now I'm trying to run the new build RC1
(eeepc, asus_laptop) without installation from SD card and it sticks just
after booting. Just a black screen and nothing else. I've also tried tegav2
build - it boots to the OS, but then gets system UI force close.
Can I get any log files to attach them here?
Thanks!
--
You received this message because you are subscribed to the Google Groups
"Android-x86" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/android-x86/-/Egonk55w9eIJ.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+***@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
cow chin
2012-03-27 18:12:21 UTC
Permalink
hi~
what do you mean by slide the power button twice?
it doesn't work when i press the power button twice.
I still cannot shut down my Eeepc901.
It just goes to the lock screen when I pressed the first time quickly.
No pop-out window shows up.
I am using android-x86-4.0-RC1-eeepc901.
It would be thankful if someone can help.
Post by Duarte Velez Grilo
Slide the power button twice and it'll show up the shut down menu.
-- Duarte
Post by Gia90
O S do you manage to shutdown your pc? if i press the power button it
just locks but it won't turn off..
Another issue, i can't connect to my ap (no matter if wpa2, wpa or wep
security, and i also trid changing channel..)
Post by O S
Very good.
I've installed the new release (RC1 eeepc) ... and almost everything is
working !
- wifi fixed
- web browser loads correctly
- youtube is working
- apps no more crash after first reboot
- terminal ok ( it used to show a white screen when i made my own
build)
Post by Gia90
Post by O S
- camera upside down
- phyisical keyboard doesn't switch to azerty (I'm french ) even though
the
Post by Gia90
Post by O S
android one did
- and the most annoying one, the screen that doesn't return to the
landscape mode after an app turned it up to portrait mode (I had to
install
Post by Gia90
Post by O S
from the market the 'Rotation Locker' app to manually restore the
correct
Post by Gia90
Post by O S
mode
and does anyone know why the ethernet support has not been included
knowing
Post by Gia90
Post by O S
that some patches exist for ics ?
can ADB be used with this release ?
Post by Norbert x
Hello,
I've installed tegav2_20120101 build on T101MT (1st revision, with
N450 on
Post by Gia90
Post by O S
Post by Norbert x
board) and it runs pretty well. Now I'm trying to run the new build
RC1
Post by Gia90
Post by O S
Post by Norbert x
(eeepc, asus_laptop) without installation from SD card and it sticks
just
Post by Gia90
Post by O S
Post by Norbert x
after booting. Just a black screen and nothing else. I've also tried
tegav2
Post by Gia90
Post by O S
Post by Norbert x
build - it boots to the OS, but then gets system UI force close.
Can I get any log files to attach them here?
Thanks!
--
You received this message because you are subscribed to the Google
Groups
Post by Gia90
Post by O S
Post by Norbert x
"Android-x86" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/android-x86/-/Egonk55w9eIJ.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google
Groups "Android-x86" group.
Post by Gia90
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To view this discussion on the web visit https://groups.google.com/d/msg/android-x86/-/rB1N5F0g5sEJ.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+***@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
Duarte Velez Grilo
2012-03-27 18:37:49 UTC
Permalink
So you have a 901, not a T101mt. The button "slide" is for the latter.

Then, press the power button two times in a row and the shutdown
option should appear. If that doesn't work, then I don't know.
Post by cow chin
hi~
what do you mean by slide the power button twice?
it doesn't work when i press the power button twice.
I still cannot shut down my Eeepc901.
It just goes to the lock screen when I pressed the first time quickly.
No pop-out window shows up.
I am using android-x86-4.0-RC1-eeepc901.
It would be thankful if someone can help.
Post by Duarte Velez Grilo
Slide the power button twice and it'll show up the shut down menu.
-- Duarte
Post by Gia90
O S do you manage to shutdown your pc? if i press the power button it
just locks but it won't turn off..
Another issue, i can't connect to my ap (no matter if wpa2, wpa or wep
security, and i also trid changing channel..)
Post by O S
Very good.
I've installed the new release (RC1 eeepc) ... and almost everything is
working !
- wifi fixed
- web browser loads correctly
- youtube is working
- apps no more crash after first reboot
- terminal ok ( it  used to show a white screen when i made my own build)
- camera upside down
- phyisical keyboard doesn't switch to azerty (I'm french ) even though the
android one did
- and the most annoying one, the screen that doesn't return to the
landscape mode after an app turned it up to portrait mode (I had to install
from the market the 'Rotation Locker' app to manually restore the correct
mode
and does anyone know why the ethernet support has not been included knowing
that some patches exist for ics ?
can ADB be used with this release ?
Post by Norbert x
Hello,
I've installed tegav2_20120101 build on T101MT (1st revision, with N450 on
board) and it runs pretty well. Now I'm trying to run the new build RC1
(eeepc, asus_laptop) without installation from SD card and it sticks just
after booting. Just a black screen and nothing else. I've also tried tegav2
build - it boots to the OS, but then gets system UI force close.
Can I get any log files to attach them here?
Thanks!
--
You received this message because you are subscribed to the Google Groups
"Android-x86" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/android-x86/-/Egonk55w9eIJ.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google
Groups "Android-x86" group.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups
"Android-x86" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/android-x86/-/rB1N5F0g5sEJ.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+***@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
O S
2012-03-04 21:40:10 UTC
Permalink
No more problems with the screen rotation after the first reboot.

sent from my asus t101mt - Android x86 RC1
Post by O S
Very good.
I've installed the new release (RC1 eeepc) ... and almost everything is
working !
- wifi fixed
- web browser loads correctly
- youtube is working
- apps no more crash after first reboot
- terminal ok ( it used to show a white screen when i made my own build)
- camera upside down
- phyisical keyboard doesn't switch to azerty (I'm french ) even though
the android one did
- and the most annoying one, the screen that doesn't return to the
landscape mode after an app turned it up to portrait mode (I had to install
from the market the 'Rotation Locker' app to manually restore the correct
mode
and does anyone know why the ethernet support has not been included
knowing that some patches exist for ics ?
can ADB be used with this release ?
Post by Norbert x
Hello,
I've installed tegav2_20120101 build on T101MT (1st revision, with N450
on board) and it runs pretty well. Now I'm trying to run the new build RC1
(eeepc, asus_laptop) without installation from SD card and it sticks just
after booting. Just a black screen and nothing else. I've also tried tegav2
build - it boots to the OS, but then gets system UI force close.
Can I get any log files to attach them here?
Thanks!
--
You received this message because you are subscribed to the Google Groups
"Android-x86" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/android-x86/-/Egonk55w9eIJ.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+***@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
Gia90
2012-03-05 15:37:29 UTC
Permalink
Yes, i can see the network list...and today i managed to connect to
other APs (both wpa and open) so i think it's due to my router
configuration....dmesg shows it tries 3 times direct probes and then
timed out...
maybe some problem with ath9k driver?
Post by O S
No more problems with the screen rotation after the first reboot.
sent from my asus t101mt - Android x86 RC1
Post by O S
Very good.
I've installed the new release (RC1 eeepc) ... and almost everything is
working !
- wifi fixed
- web browser loads correctly
- youtube is working
- apps no more crash after first reboot
- terminal ok ( it  used to show a white screen when i made my own build)
- camera upside down
- phyisical keyboard doesn't switch to azerty (I'm french ) even though
the android one did
- and the most annoying one, the screen that doesn't return to the
landscape mode after an app turned it up to portrait mode (I had to install
from the market the 'Rotation Locker' app to manually restore the correct
mode
and does anyone know why the ethernet support has not been included
knowing that some patches exist for ics ?
can ADB be used with this release ?
Post by Norbert x
Hello,
I've installed tegav2_20120101 build on T101MT (1st revision, with N450
on board) and it runs pretty well. Now I'm trying to run the new build RC1
(eeepc, asus_laptop) without installation from SD card and it sticks just
after booting. Just a black screen and nothing else. I've also tried tegav2
build - it boots to the OS, but then gets system UI force close.
Can I get any log files to attach them here?
Thanks!
--
You received this message because you are subscribed to the Google Groups
"Android-x86" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/android-x86/-/Egonk55w9eIJ.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+***@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
Lee
2012-03-05 19:01:39 UTC
Permalink
I notice my S10-3t does this as well.
It will connect to my neighbors Linksys open router just fine.
But when I try to connect to my phones Wifi Hotspot it will try a couple
times but fails.
I tried changing many settings but so far no luck.
Post by Gia90
Yes, i can see the network list...and today i managed to connect to
other APs (both wpa and open) so i think it's due to my router
configuration....dmesg shows it tries 3 times direct probes and then
timed out...
maybe some problem with ath9k driver?
Post by O S
No more problems with the screen rotation after the first reboot.
sent from my asus t101mt - Android x86 RC1
Post by O S
Very good.
I've installed the new release (RC1 eeepc) ... and almost everything
is
Post by O S
Post by O S
working !
- wifi fixed
- web browser loads correctly
- youtube is working
- apps no more crash after first reboot
- terminal ok ( it used to show a white screen when i made my own
build)
Post by O S
Post by O S
- camera upside down
- phyisical keyboard doesn't switch to azerty (I'm french ) even
though
Post by O S
Post by O S
the android one did
- and the most annoying one, the screen that doesn't return to the
landscape mode after an app turned it up to portrait mode (I had to
install
Post by O S
Post by O S
from the market the 'Rotation Locker' app to manually restore the
correct
Post by O S
Post by O S
mode
and does anyone know why the ethernet support has not been included
knowing that some patches exist for ics ?
can ADB be used with this release ?
Post by Norbert x
Hello,
I've installed tegav2_20120101 build on T101MT (1st revision, with
N450
Post by O S
Post by O S
Post by Norbert x
on board) and it runs pretty well. Now I'm trying to run the new
build RC1
Post by O S
Post by O S
Post by Norbert x
(eeepc, asus_laptop) without installation from SD card and it sticks
just
Post by O S
Post by O S
Post by Norbert x
after booting. Just a black screen and nothing else. I've also tried
tegav2
Post by O S
Post by O S
Post by Norbert x
build - it boots to the OS, but then gets system UI force close.
Can I get any log files to attach them here?
Thanks!
--
You received this message because you are subscribed to the Google
Groups
Post by O S
Post by O S
Post by Norbert x
"Android-x86" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/android-x86/-/Egonk55w9eIJ.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To view this discussion on the web visit https://groups.google.com/d/msg/android-x86/-/JPasiOsvH3wJ.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+***@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
Norbert x
2012-03-05 20:20:59 UTC
Permalink
Post by Lee
I notice my S10-3t does this as well.
Hello, Lee! Please do not flood. We discuss here only T101MT.

@all
I discovered, that brightness control from GUI does not work
(brightness not change on slider move);
in 4.0-RC1 eeepc version. May be asus_laptop does this.

Life without red border is good.
Post by Lee
It will connect to my neighbors Linksys open router just fine.
But when I try to connect to my phones Wifi Hotspot it will try a couple
times but fails.
I tried changing many settings but so far no luck.
Post by Gia90
Yes, i can see the network list...and today i managed to connect to
other APs (both wpa and open) so i think it's due to my router
configuration....dmesg shows it tries 3 times direct probes and then
timed out...
maybe some problem with ath9k driver?
Post by O S
No more problems with the screen rotation after the first reboot.
sent from my asus t101mt - Android x86 RC1
Post by O S
Very good.
I've installed the new release (RC1 eeepc) ... and almost everything
is
Post by O S
Post by O S
working !
- wifi fixed
- web browser loads correctly
- youtube is working
- apps no more crash after first reboot
- terminal ok ( it  used to show a white screen when i made my own
build)
Post by O S
Post by O S
- camera upside down
- phyisical keyboard doesn't switch to azerty (I'm french ) even
though
Post by O S
Post by O S
the android one did
- and the most annoying one, the screen that doesn't return to the
landscape mode after an app turned it up to portrait mode (I had to
install
Post by O S
Post by O S
from the market the 'Rotation Locker' app to manually restore the
correct
Post by O S
Post by O S
mode
and does anyone know why the ethernet support has not been included
knowing that some patches exist for ics ?
can ADB be used with this release ?
Post by Norbert x
Hello,
I've installed tegav2_20120101 build on T101MT (1st revision, with
N450
Post by O S
Post by O S
Post by Norbert x
on board) and it runs pretty well. Now I'm trying to run the new
build RC1
Post by O S
Post by O S
Post by Norbert x
(eeepc, asus_laptop) without installation from SD card and it sticks
just
Post by O S
Post by O S
Post by Norbert x
after booting. Just a black screen and nothing else. I've also tried
tegav2
Post by O S
Post by O S
Post by Norbert x
build - it boots to the OS, but then gets system UI force close.
Can I get any log files to attach them here?
Thanks!
--
You received this message because you are subscribed to the Google
Groups
Post by O S
Post by O S
Post by Norbert x
"Android-x86" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/android-x86/-/Egonk55w9eIJ.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+***@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
Duarte Velez Grilo
2012-03-05 20:38:47 UTC
Permalink
But you can control it anyway with the usual Fn key + F5/F6.

-- Duarte
Post by Lee
I notice my S10-3t does this as well.
Hello, Lee!  Please do not flood. We discuss here only T101MT.
@all
I discovered, that brightness control from GUI does not work
(brightness not change on slider move);
in 4.0-RC1 eeepc version. May be asus_laptop does this.
Life without red border is good.
Post by Lee
It will connect to my neighbors Linksys open router just fine.
But when I try to connect to my phones Wifi Hotspot it will try a couple
times but fails.
I tried changing many settings but so far no luck.
Post by Gia90
Yes, i can see the network list...and today i managed to connect to
other APs (both wpa and open) so i think it's due to my router
configuration....dmesg shows it tries 3 times direct probes and then
timed out...
maybe some problem with ath9k driver?
Post by O S
No more problems with the screen rotation after the first reboot.
sent from my asus t101mt - Android x86 RC1
Post by O S
Very good.
I've installed the new release (RC1 eeepc) ... and almost everything
is
Post by O S
Post by O S
working !
- wifi fixed
- web browser loads correctly
- youtube is working
- apps no more crash after first reboot
- terminal ok ( it  used to show a white screen when i made my own
build)
Post by O S
Post by O S
- camera upside down
- phyisical keyboard doesn't switch to azerty (I'm french ) even
though
Post by O S
Post by O S
the android one did
- and the most annoying one, the screen that doesn't return to the
landscape mode after an app turned it up to portrait mode (I had to
install
Post by O S
Post by O S
from the market the 'Rotation Locker' app to manually restore the
correct
Post by O S
Post by O S
mode
and does anyone know why the ethernet support has not been included
knowing that some patches exist for ics ?
can ADB be used with this release ?
Post by Norbert x
Hello,
I've installed tegav2_20120101 build on T101MT (1st revision, with
N450
Post by O S
Post by O S
Post by Norbert x
on board) and it runs pretty well. Now I'm trying to run the new
build RC1
Post by O S
Post by O S
Post by Norbert x
(eeepc, asus_laptop) without installation from SD card and it sticks
just
Post by O S
Post by O S
Post by Norbert x
after booting. Just a black screen and nothing else. I've also tried
tegav2
Post by O S
Post by O S
Post by Norbert x
build - it boots to the OS, but then gets system UI force close.
Can I get any log files to attach them here?
Thanks!
--
You received this message because you are subscribed to the Google
Groups
Post by O S
Post by O S
Post by Norbert x
"Android-x86" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/android-x86/-/Egonk55w9eIJ.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+***@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
Dutchman
2012-06-20 08:47:18 UTC
Permalink
Hi,

I have the same issue related to brightness control.
For my feeling the brightness can not be set to the max possible value of
the screen.

If i use the F key (+) to maximum, the screen stilll looks quite dark
comparing with windows for example.

Any idea ?

Dutch
Post by Duarte Velez Grilo
But you can control it anyway with the usual Fn key + F5/F6.
-- Duarte
Post by Norbert x
Post by Lee
I notice my S10-3t does this as well.
Hello, Lee! Please do not flood. We discuss here only T101MT.
@all
I discovered, that brightness control from GUI does not work
(brightness not change on slider move);
in 4.0-RC1 eeepc version. May be asus_laptop does this.
Life without red border is good.
Post by Lee
It will connect to my neighbors Linksys open router just fine.
But when I try to connect to my phones Wifi Hotspot it will try a couple
times but fails.
I tried changing many settings but so far no luck.
Post by Gia90
Yes, i can see the network list...and today i managed to connect to
other APs (both wpa and open) so i think it's due to my router
configuration....dmesg shows it tries 3 times direct probes and then
timed out...
maybe some problem with ath9k driver?
Post by O S
No more problems with the screen rotation after the first reboot.
sent from my asus t101mt - Android x86 RC1
Post by O S
Very good.
I've installed the new release (RC1 eeepc) ... and almost
everything
Post by Norbert x
Post by Lee
Post by Gia90
is
Post by O S
Post by O S
working !
- wifi fixed
- web browser loads correctly
- youtube is working
- apps no more crash after first reboot
- terminal ok ( it used to show a white screen when i made my own
build)
Post by O S
Post by O S
- camera upside down
- phyisical keyboard doesn't switch to azerty (I'm french ) even
though
Post by O S
Post by O S
the android one did
- and the most annoying one, the screen that doesn't return to the
landscape mode after an app turned it up to portrait mode (I had
to
Post by Norbert x
Post by Lee
Post by Gia90
install
Post by O S
Post by O S
from the market the 'Rotation Locker' app to manually restore the
correct
Post by O S
Post by O S
mode
and does anyone know why the ethernet support has not been
included
Post by Norbert x
Post by Lee
Post by Gia90
Post by O S
Post by O S
knowing that some patches exist for ics ?
can ADB be used with this release ?
Post by Norbert x
Hello,
I've installed tegav2_20120101 build on T101MT (1st revision,
with
Post by Norbert x
Post by Lee
Post by Gia90
N450
Post by O S
Post by O S
Post by Norbert x
on board) and it runs pretty well. Now I'm trying to run the new
build RC1
Post by O S
Post by O S
Post by Norbert x
(eeepc, asus_laptop) without installation from SD card and it
sticks
Post by Norbert x
Post by Lee
Post by Gia90
just
Post by O S
Post by O S
Post by Norbert x
after booting. Just a black screen and nothing else. I've also
tried
Post by Norbert x
Post by Lee
Post by Gia90
tegav2
Post by O S
Post by O S
Post by Norbert x
build - it boots to the OS, but then gets system UI force close.
Can I get any log files to attach them here?
Thanks!
--
You received this message because you are subscribed to the
Google
Post by Norbert x
Post by Lee
Post by Gia90
Groups
Post by O S
Post by O S
Post by Norbert x
"Android-x86" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/android-x86/-/Egonk55w9eIJ.
To post to this group, send email to
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google
Groups "Android-x86" group.
Post by Norbert x
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To view this discussion on the web visit https://groups.google.com/d/msg/android-x86/-/6NdOGMaWVLYJ.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+***@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
Lee
2012-03-05 21:30:30 UTC
Permalink
Wasn't trying to flood.
Just mentioning a problem that is similar to this one on the 4.0 builds so
maybe the developers can find a connection and fix these issues.
Post by Norbert x
Post by Lee
I notice my S10-3t does this as well.
Hello, Lee! Please do not flood. We discuss here only T101MT.
@all
I discovered, that brightness control from GUI does not work
(brightness not change on slider move);
in 4.0-RC1 eeepc version. May be asus_laptop does this.
Life without red border is good.
Post by Lee
It will connect to my neighbors Linksys open router just fine.
But when I try to connect to my phones Wifi Hotspot it will try a couple
times but fails.
I tried changing many settings but so far no luck.
Post by Gia90
Yes, i can see the network list...and today i managed to connect to
other APs (both wpa and open) so i think it's due to my router
configuration....dmesg shows it tries 3 times direct probes and then
timed out...
maybe some problem with ath9k driver?
Post by O S
No more problems with the screen rotation after the first reboot.
sent from my asus t101mt - Android x86 RC1
Post by O S
Very good.
I've installed the new release (RC1 eeepc) ... and almost
everything
Post by Lee
Post by Gia90
is
Post by O S
Post by O S
working !
- wifi fixed
- web browser loads correctly
- youtube is working
- apps no more crash after first reboot
- terminal ok ( it used to show a white screen when i made my own
build)
Post by O S
Post by O S
- camera upside down
- phyisical keyboard doesn't switch to azerty (I'm french ) even
though
Post by O S
Post by O S
the android one did
- and the most annoying one, the screen that doesn't return to the
landscape mode after an app turned it up to portrait mode (I had
to
Post by Lee
Post by Gia90
install
Post by O S
Post by O S
from the market the 'Rotation Locker' app to manually restore the
correct
Post by O S
Post by O S
mode
and does anyone know why the ethernet support has not been
included
Post by Lee
Post by Gia90
Post by O S
Post by O S
knowing that some patches exist for ics ?
can ADB be used with this release ?
Post by Norbert x
Hello,
I've installed tegav2_20120101 build on T101MT (1st revision,
with
Post by Lee
Post by Gia90
N450
Post by O S
Post by O S
Post by Norbert x
on board) and it runs pretty well. Now I'm trying to run the new
build RC1
Post by O S
Post by O S
Post by Norbert x
(eeepc, asus_laptop) without installation from SD card and it
sticks
Post by Lee
Post by Gia90
just
Post by O S
Post by O S
Post by Norbert x
after booting. Just a black screen and nothing else. I've also
tried
Post by Lee
Post by Gia90
tegav2
Post by O S
Post by O S
Post by Norbert x
build - it boots to the OS, but then gets system UI force close.
Can I get any log files to attach them here?
Thanks!
--
You received this message because you are subscribed to the
Google
Post by Lee
Post by Gia90
Groups
Post by O S
Post by O S
Post by Norbert x
"Android-x86" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/android-x86/-/Egonk55w9eIJ.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
I notice my S10-3t does this as well.
Hello, Lee! Please do not flood. We discuss here only T101MT.
@all
I discovered, that brightness control from GUI does not work
(brightness not change on slider move);
in 4.0-RC1 eeepc version. May be asus_laptop does this.
Life without red border is good.
Post by Lee
It will connect to my neighbors Linksys open router just fine.
But when I try to connect to my phones Wifi Hotspot it will try a couple
times but fails.
I tried changing many settings but so far no luck.
Post by Gia90
Yes, i can see the network list...and today i managed to connect to
other APs (both wpa and open) so i think it's due to my router
configuration....dmesg shows it tries 3 times direct probes and then
timed out...
maybe some problem with ath9k driver?
Post by O S
No more problems with the screen rotation after the first reboot.
sent from my asus t101mt - Android x86 RC1
Post by O S
Very good.
I've installed the new release (RC1 eeepc) ... and almost
everything
Post by Lee
Post by Gia90
is
Post by O S
Post by O S
working !
- wifi fixed
- web browser loads correctly
- youtube is working
- apps no more crash after first reboot
- terminal ok ( it used to show a white screen when i made my own
build)
Post by O S
Post by O S
- camera upside down
- phyisical keyboard doesn't switch to azerty (I'm french ) even
though
Post by O S
Post by O S
the android one did
- and the most annoying one, the screen that doesn't return to the
landscape mode after an app turned it up to portrait mode (I had
to
Post by Lee
Post by Gia90
install
Post by O S
Post by O S
from the market the 'Rotation Locker' app to manually restore the
correct
Post by O S
Post by O S
mode
and does anyone know why the ethernet support has not been
included
Post by Lee
Post by Gia90
Post by O S
Post by O S
knowing that some patches exist for ics ?
can ADB be used with this release ?
Post by Norbert x
Hello,
I've installed tegav2_20120101 build on T101MT (1st revision,
with
Post by Lee
Post by Gia90
N450
Post by O S
Post by O S
Post by Norbert x
on board) and it runs pretty well. Now I'm trying to run the new
build RC1
Post by O S
Post by O S
Post by Norbert x
(eeepc, asus_laptop) without installation from SD card and it
sticks
Post by Lee
Post by Gia90
just
Post by O S
Post by O S
Post by Norbert x
after booting. Just a black screen and nothing else. I've also
tried
Post by Lee
Post by Gia90
tegav2
Post by O S
Post by O S
Post by Norbert x
build - it boots to the OS, but then gets system UI force close.
Can I get any log files to attach them here?
Thanks!
--
You received this message because you are subscribed to the
Google
Post by Lee
Post by Gia90
Groups
Post by O S
Post by O S
Post by Norbert x
"Android-x86" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/android-x86/-/Egonk55w9eIJ.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To view this discussion on the web visit https://groups.google.com/d/msg/android-x86/-/pTogCP61jksJ.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+***@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
O S
2012-03-05 21:50:36 UTC
Permalink
Yes, most function keys are operational.
However, Did someone succeed to make flash animations work ?

It's an amazing build :-) !

sent from my asus t101mt - Android x86 RC1
Post by Norbert x
Post by Lee
I notice my S10-3t does this as well.
Hello, Lee! Please do not flood. We discuss here only T101MT.
@all
I discovered, that brightness control from GUI does not work
(brightness not change on slider move);
in 4.0-RC1 eeepc version. May be asus_laptop does this.
Life without red border is good.
Post by Lee
It will connect to my neighbors Linksys open router just fine.
But when I try to connect to my phones Wifi Hotspot it will try a couple
times but fails.
I tried changing many settings but so far no luck.
Post by Gia90
Yes, i can see the network list...and today i managed to connect to
other APs (both wpa and open) so i think it's due to my router
configuration....dmesg shows it tries 3 times direct probes and then
timed out...
maybe some problem with ath9k driver?
Post by O S
No more problems with the screen rotation after the first reboot.
sent from my asus t101mt - Android x86 RC1
Post by O S
Very good.
I've installed the new release (RC1 eeepc) ... and almost
everything
Post by Lee
Post by Gia90
is
Post by O S
Post by O S
working !
- wifi fixed
- web browser loads correctly
- youtube is working
- apps no more crash after first reboot
- terminal ok ( it used to show a white screen when i made my own
build)
Post by O S
Post by O S
- camera upside down
- phyisical keyboard doesn't switch to azerty (I'm french ) even
though
Post by O S
Post by O S
the android one did
- and the most annoying one, the screen that doesn't return to the
landscape mode after an app turned it up to portrait mode (I had to
install
Post by O S
Post by O S
from the market the 'Rotation Locker' app to manually restore the
correct
Post by O S
Post by O S
mode
and does anyone know why the ethernet support has not been included
knowing that some patches exist for ics ?
can ADB be used with this release ?
Post by Norbert x
Hello,
I've installed tegav2_20120101 build on T101MT (1st revision, with
N450
Post by O S
Post by O S
Post by Norbert x
on board) and it runs pretty well. Now I'm trying to run the new
build RC1
Post by O S
Post by O S
Post by Norbert x
(eeepc, asus_laptop) without installation from SD card and it
sticks
Post by Lee
Post by Gia90
just
Post by O S
Post by O S
Post by Norbert x
after booting. Just a black screen and nothing else. I've also
tried
Post by Lee
Post by Gia90
tegav2
Post by O S
Post by O S
Post by Norbert x
build - it boots to the OS, but then gets system UI force close.
Can I get any log files to attach them here?
Thanks!
--
You received this message because you are subscribed to the Google
Groups
Post by O S
Post by O S
Post by Norbert x
"Android-x86" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/android-x86/-/Egonk55w9eIJ.
.
Post by Lee
Post by Gia90
Post by O S
Post by O S
Post by Norbert x
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups
"Android-x86" group.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+***@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
Gia90
2012-03-07 15:34:50 UTC
Permalink
I think that dolphin HD will let you view flash animations, since i
realized that youtube player was loaded by dolphin (even if it
couldn't show the video see here:
https://groups.google.com/group/android-x86/browse_thread/thread/c844e0f107a90eca?hl=it)
Post by O S
Yes, most function keys are operational.
However, Did someone succeed to make flash animations work ?
It's an amazing build :-)  !
sent from my asus t101mt - Android x86 RC1
Post by Lee
I notice my S10-3t does this as well.
Hello, Lee!  Please do not flood. We discuss here only T101MT.
@all
I discovered, that brightness control from GUI does not work
(brightness not change on slider move);
in 4.0-RC1 eeepc version. May be asus_laptop does this.
Life without red border is good.
Post by Lee
It will connect to my neighbors Linksys open router just fine.
But when I try to connect to my phones Wifi Hotspot it will try a couple
times but fails.
I tried changing many settings but so far no luck.
Post by Gia90
Yes, i can see the network list...and today i managed to connect to
other APs (both wpa and open) so i think it's due to my router
configuration....dmesg shows it tries 3 times direct probes and then
timed out...
maybe some problem with ath9k driver?
Post by O S
No more problems with the screen rotation after the first reboot.
sent from my asus t101mt - Android x86 RC1
Post by O S
Very good.
I've installed the new release (RC1 eeepc) ... and almost
everything
Post by Lee
Post by Gia90
is
Post by O S
Post by O S
working !
- wifi fixed
- web browser loads correctly
- youtube is working
- apps no more crash after first reboot
- terminal ok ( it  used to show a white screen when i made my own
build)
Post by O S
Post by O S
- camera upside down
- phyisical keyboard doesn't switch to azerty (I'm french ) even
though
Post by O S
Post by O S
the android one did
- and the most annoying one, the screen that doesn't return to the
landscape mode after an app turned it up to portrait mode (I had to
install
Post by O S
Post by O S
from the market the 'Rotation Locker' app to manually restore the
correct
Post by O S
Post by O S
mode
and does anyone know why the ethernet support has not been included
knowing that some patches exist for ics ?
can ADB be used with this release ?
Post by Norbert x
Hello,
I've installed tegav2_20120101 build on T101MT (1st revision, with
N450
Post by O S
Post by O S
Post by Norbert x
on board) and it runs pretty well. Now I'm trying to run the new
build RC1
Post by O S
Post by O S
Post by Norbert x
(eeepc, asus_laptop) without installation from SD card and it
sticks
Post by Lee
Post by Gia90
just
Post by O S
Post by O S
Post by Norbert x
after booting. Just a black screen and nothing else. I've also
tried
Post by Lee
Post by Gia90
tegav2
Post by O S
Post by O S
Post by Norbert x
build - it boots to the OS, but then gets system UI force close.
Can I get any log files to attach them here?
Thanks!
--
You received this message because you are subscribed to the Google
Groups
Post by O S
Post by O S
Post by Norbert x
"Android-x86" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/android-x86/-/Egonk55w9eIJ.
.
Post by Lee
Post by Gia90
Post by O S
Post by O S
Post by Norbert x
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups
"Android-x86" group.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+***@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
Gia90
2012-03-08 12:45:29 UTC
Permalink
Anyone can tell me if this release has NTFS support?
I'm trying to mount my ntfs partition but it seems not to work...mount
command reports "no such device" even if my partition is showed by
"fdisk /dev/block/sda -l" ...
Any help?
Post by Gia90
I think that dolphin HD will let you view flash animations, since i
realized that youtube player was loaded by dolphin (even if it
couldn't show the video see here:https://groups.google.com/group/android-x86/browse_thread/thread/c844...)
Post by O S
Yes, most function keys are operational.
However, Did someone succeed to make flash animations work ?
It's an amazing build :-)  !
sent from my asus t101mt - Android x86 RC1
Post by Lee
I notice my S10-3t does this as well.
Hello, Lee!  Please do not flood. We discuss here only T101MT.
@all
I discovered, that brightness control from GUI does not work
(brightness not change on slider move);
in 4.0-RC1 eeepc version. May be asus_laptop does this.
Life without red border is good.
Post by Lee
It will connect to my neighbors Linksys open router just fine.
But when I try to connect to my phones Wifi Hotspot it will try a couple
times but fails.
I tried changing many settings but so far no luck.
Post by Gia90
Yes, i can see the network list...and today i managed to connect to
other APs (both wpa and open) so i think it's due to my router
configuration....dmesg shows it tries 3 times direct probes and then
timed out...
maybe some problem with ath9k driver?
Post by O S
No more problems with the screen rotation after the first reboot.
sent from my asus t101mt - Android x86 RC1
Post by O S
Very good.
I've installed the new release (RC1 eeepc) ... and almost
everything
Post by Lee
Post by Gia90
is
Post by O S
Post by O S
working !
- wifi fixed
- web browser loads correctly
- youtube is working
- apps no more crash after first reboot
- terminal ok ( it  used to show a white screen when i made my own
build)
Post by O S
Post by O S
- camera upside down
- phyisical keyboard doesn't switch to azerty (I'm french ) even
though
Post by O S
Post by O S
the android one did
- and the most annoying one, the screen that doesn't return to the
landscape mode after an app turned it up to portrait mode (I had to
install
Post by O S
Post by O S
from the market the 'Rotation Locker' app to manually restore the
correct
Post by O S
Post by O S
mode
and does anyone know why the ethernet support has not been included
knowing that some patches exist for ics ?
can ADB be used with this release ?
Post by Norbert x
Hello,
I've installed tegav2_20120101 build on T101MT (1st revision, with
N450
Post by O S
Post by O S
Post by Norbert x
on board) and it runs pretty well. Now I'm trying to run the new
build RC1
Post by O S
Post by O S
Post by Norbert x
(eeepc, asus_laptop) without installation from SD card and it
sticks
Post by Lee
Post by Gia90
just
Post by O S
Post by O S
Post by Norbert x
after booting. Just a black screen and nothing else. I've also
tried
Post by Lee
Post by Gia90
tegav2
Post by O S
Post by O S
Post by Norbert x
build - it boots to the OS, but then gets system UI force close.
Can I get any log files to attach them here?
Thanks!
--
You received this message because you are subscribed to the Google
Groups
Post by O S
Post by O S
Post by Norbert x
"Android-x86" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/android-x86/-/Egonk55w9eIJ.
.
Post by Lee
Post by Gia90
Post by O S
Post by O S
Post by Norbert x
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups
"Android-x86" group.
To unsubscribe from this group, send email to
For more options, visit this group at
http://groups.google.com/group/android-x86?hl=en.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+***@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
yiifburj
2013-01-04 08:03:17 UTC
Permalink
Hi, when your wifi doesn't work, try to turn it on by Fn+?,then open
terminal,type su, netcfg wlan0(for example) up, I recompile
wireless_tool(add -m32 -static to CFLAGS in the makefile,others see the
makefile), copy iwlist iwconfig to your $android_directory/system/bin, it
works very well, my reply is so late because i'm new here, I faced the wifi
problem with the proper driver,and solved it by this way hope it can help
others.

圚 2012幎2月17日星期五UTC+8䞊午3时31分45秒Norbert x写道
Post by Norbert x
Hello!
I have same problems with my T101MT (Atom N570).
I tried many ICS builds: android-x86-4.0-eeepc-20120101.iso, android-
x86-4.0-eeepc-20111225.iso, android-x86-4.0-asus_laptop-20120101.iso,
android-x86-4.0-asus_laptop-20111225.iso, android-x86-4.0-
eeepc-20111209.iso.
Wi-Fi is not working (as in #557, #620, #621, #659, #667, #686). I
tried to switch it on/off from BIOS with no luck.
As a linux user I know about iwconfig, iwlist and rfkill. An android
alternative for them is "network stack". I do not how to toggle wi-fi
with it.
02:00.0 Network controller: Atheros Communications Inc. AR9285
Wireless Network Adapter (PCI-Express) (rev 01).
How can I help developers to solve the problem?
As temporary solution this works for me (http://code.google.com/p/
After booting android-x86-4.0-asus_laptop-20120101 (installed on a usb
su
chmod -R /data
For the WiFi issue, not all Wireless cards are supported. I know that
mine is a AR5B95 Half Height and WiFi works out of box.
Sometimes you can change WiFi cards on the laptops but you MUST make
sure the replacement is branded for your laptop. Ie; make sure you
replace your HP's WiFi card with a HP card. If you try card from say
Dell it won't work.
Hi everyone,
I'm really disappointed because also this new release doesn't allow me
to connect through wifi to any network on myt101mt...
Another issue, is that it does not remeber the changes made to the
widgets...
I really like your great work and i i'd really like to help you to
make android x86 work onT101mt, which would be a perfect android
tablet!
I have some knowledge about linux but i don't know a lot about
android...
So if someone can point me in the right direction, i would like to
investigate, first of all, in the wifi issue, and then in the minor
issues...
Any help would be much appreciated!!
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To view this discussion on the web visit https://groups.google.com/d/msg/android-x86/-/H9CfhIXWOr4J.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+***@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
lewis donofrio
2013-01-04 13:15:15 UTC
Permalink
How do you get netcfg directives to persist though a reboot?

--Thanks.
_____________________________________________
https://www.vizify.com/lewis-donofrio - 734-743-1743
Post by yiifburj
Hi, when your wifi doesn't work, try to turn it on by Fn+?,then open
terminal,type su, netcfg wlan0(for example) up, I recompile
wireless_tool(add -m32 -static to CFLAGS in the makefile,others see the
makefile), copy iwlist iwconfig to your $android_directory/system/bin, it
works very well, my reply is so late because i'm new here, I faced the wifi
problem with the proper driver,and solved it by this way hope it can help
others.
圚 2012幎2月17日星期五UTC+8䞊午3时31分45秒Norbert x写道
Post by Norbert x
Hello!
I have same problems with my T101MT (Atom N570).
I tried many ICS builds: android-x86-4.0-eeepc-20120101.iso, android-
x86-4.0-eeepc-20111225.iso, android-x86-4.0-asus_laptop-20120101.iso,
android-x86-4.0-asus_laptop-20111225.iso, android-x86-4.0-
eeepc-20111209.iso.
Wi-Fi is not working (as in #557, #620, #621, #659, #667, #686). I
tried to switch it on/off from BIOS with no luck.
As a linux user I know about iwconfig, iwlist and rfkill. An android
alternative for them is "network stack". I do not how to toggle wi-fi
with it.
02:00.0 Network controller: Atheros Communications Inc. AR9285
Wireless Network Adapter (PCI-Express) (rev 01).
How can I help developers to solve the problem?
As temporary solution this works for me (http://code.google.com/p/
After booting android-x86-4.0-asus_laptop-20120101 (installed on a usb
su
chmod -R /data
For the WiFi issue, not all Wireless cards are supported. I know that
mine is a AR5B95 Half Height and WiFi works out of box.
Sometimes you can change WiFi cards on the laptops but you MUST make
sure the replacement is branded for your laptop. Ie; make sure you
replace your HP's WiFi card with a HP card. If you try card from say
Dell it won't work.
Hi everyone,
I'm really disappointed because also this new release doesn't allow
me
to connect through wifi to any network on myt101mt...
Another issue, is that it does not remeber the changes made to the
widgets...
I really like your great work and i i'd really like to help you to
make android x86 work onT101mt, which would be a perfect android
tablet!
I have some knowledge about linux but i don't know a lot about
android...
So if someone can point me in the right direction, i would like to
investigate, first of all, in the wifi issue, and then in the minor
issues...
Any help would be much appreciated!!
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To view this discussion on the web visit https://groups.google.com/d/msg/android-x86/-/z2cXvNaSSwQJ.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+***@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
fuzzy7k
2013-01-05 15:12:07 UTC
Permalink
Look for /etc/init.sh and put it in there.
Post by lewis donofrio
How do you get netcfg directives to persist though a reboot?
--Thanks.
_____________________________________________
https://www.vizify.com/lewis-donofrio - 734-743-1743
Post by yiifburj
Hi, when your wifi doesn't work, try to turn it on by Fn+?,then open
terminal,type su, netcfg wlan0(for example) up, I recompile
wireless_tool(add -m32 -static to CFLAGS in the makefile,others see the
makefile), copy iwlist iwconfig to your $android_directory/system/bin, it
works very well, my reply is so late because i'm new here, I faced the wifi
problem with the proper driver,and solved it by this way hope it can help
others.
圚 2012幎2月17日星期五UTC+8䞊午3时31分45秒Norbert x写道
Post by Norbert x
Hello!
I have same problems with my T101MT (Atom N570).
I tried many ICS builds: android-x86-4.0-eeepc-20120101.iso, android-
x86-4.0-eeepc-20111225.iso, android-x86-4.0-asus_laptop-20120101.iso,
android-x86-4.0-asus_laptop-20111225.iso, android-x86-4.0-
eeepc-20111209.iso.
Wi-Fi is not working (as in #557, #620, #621, #659, #667, #686). I
tried to switch it on/off from BIOS with no luck.
As a linux user I know about iwconfig, iwlist and rfkill. An android
alternative for them is "network stack". I do not how to toggle wi-fi
with it.
02:00.0 Network controller: Atheros Communications Inc. AR9285
Wireless Network Adapter (PCI-Express) (rev 01).
How can I help developers to solve the problem?
As temporary solution this works for me (http://code.google.com/p/
After booting android-x86-4.0-asus_laptop-20120101 (installed on a usb
su
chmod -R /data
For the WiFi issue, not all Wireless cards are supported. I know that
mine is a AR5B95 Half Height and WiFi works out of box.
Sometimes you can change WiFi cards on the laptops but you MUST make
sure the replacement is branded for your laptop. Ie; make sure you
replace your HP's WiFi card with a HP card. If you try card from say
Dell it won't work.
Hi everyone,
I'm really disappointed because also this new release doesn't allow
me
to connect through wifi to any network on myt101mt...
Another issue, is that it does not remeber the changes made to the
widgets...
I really like your great work and i i'd really like to help you to
make android x86 work onT101mt, which would be a perfect android
tablet!
I have some knowledge about linux but i don't know a lot about
android...
So if someone can point me in the right direction, i would like to
investigate, first of all, in the wifi issue, and then in the minor
issues...
Any help would be much appreciated!!
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To view this discussion on the web visit https://groups.google.com/d/msg/android-x86/-/dwEGetuYcdEJ.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+***@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
Patrick Wong
2013-01-12 02:56:19 UTC
Permalink
I have the same problems too. but when I change my wifi mini card. it works
perfectly. This happen on the driver doesn't support the wifi mini card
come with T101MT. you may need to change to AR5B95 Mini Card.
Hi everyone,
I'm really disappointed because also this new release doesn't allow me
to connect through wifi to any network on my t101mt...
Another issue, is that it does not remeber the changes made to the
widgets...
I really like your great work and i i'd really like to help you to
make android x86 work on T101mt, which would be a perfect android
tablet!
I have some knowledge about linux but i don't know a lot about
android...
So if someone can point me in the right direction, i would like to
investigate, first of all, in the wifi issue, and then in the minor
issues...
Any help would be much appreciated!!
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To view this discussion on the web visit https://groups.google.com/d/msg/android-x86/-/lOXYYWjtfScJ.
To post to this group, send email to android-x86-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
To unsubscribe from this group, send email to android-x86+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit this group at http://groups.google.com/group/android-x86?hl=en.
Continue reading on narkive:
Loading...