Discussion:
Nextbook Flexx 11 Android-x86 7.1-r1 (Nougat-x86)
(too old to reply)
Shawn Peterman
2018-03-06 00:51:52 UTC
Permalink
Is there any reason to believe that this version will work any better with
the components on my machine (Nextbook Flexx 11) than the most recent
release candidate? Specifically, the sound, microphone, power button,
camera, screen rotation detection and screen casting do not currently work
with Android-x86 7.1-rc2 (Nougat-x86). Are there updated mods in this
release for my device?

Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Shawn Peterman
2018-03-07 01:57:06 UTC
Permalink
If it helps this is one the Baytrail devices... Any answers are appreciated
:-)
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Shawn Peterman
2018-03-07 05:42:53 UTC
Permalink
Thanks for the reply! This unit has too much to re-install for that. Thanks
:-)
Post by Shawn Peterman
Post by Shawn Peterman
If it helps this is one the Baytrail devices... Any answers are
appreciated
Post by Shawn Peterman
:-)
It's better to try yourself.
But don't expect too much.
The kernel is almost the same.
(only minor updates and security fixes)
--
Chih-Wei
Android-x86 project
http://www.android-x86.org
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Shawn Peterman
2018-03-07 10:04:27 UTC
Permalink
No change in live mode, still the same components not functioning. Ah well,
I'll likely update to r1 in the next few days just for the security
updates.

Thanks for the hard work on this!

Side note: The only USB creator that worked to make this live usb was
Rufus. None of the others made the drive viewable from the boot menu.
Likely to do with this machines 32 bit UEFI
Post by Shawn Peterman
Post by Shawn Peterman
Thanks for the reply! This unit has too much to re-install for that.
Thanks
Post by Shawn Peterman
:-)
You can try the live mode first.
No need to install.
--
Chih-Wei
Android-x86 project
http://www.android-x86.org
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Antony Stone
2018-03-07 10:31:09 UTC
Permalink
The only USB creator that worked to make this live usb was Rufus. None of
the others made the drive viewable from the boot menu. Likely to do with
this machines 32 bit UEFI
Could you elaborate on "the others"? What other tools (running under what
O/Ses) did you try, and find that they created non-bootable USBs?

This could be useful information for other people facing similar scenarios.

Thanks,


Antony.
--
"If I've told you once, I've told you a million times - stop exaggerating!"

Please reply to the list;
please *don't* CC me.
Shawn Peterman
2018-03-07 17:48:34 UTC
Permalink
Sure! I tried Win32 Disk Imager, Unetbootin, Universal USB Installer, Yumi
and something call ISO to USB all under Windows 10. They all created the
Live USB but none would boot on that system or even be recognized by the
boot manager. Rufus has an option to set the partition scheme. "GPT
Partition scheme of UEFI" works.
Post by Antony Stone
The only USB creator that worked to make this live usb was Rufus. None
of
the others made the drive viewable from the boot menu. Likely to do with
this machines 32 bit UEFI
Could you elaborate on "the others"? What other tools (running under what
O/Ses) did you try, and find that they created non-bootable USBs?
This could be useful information for other people facing similar scenarios.
Thanks,
Antony.
--
"If I've told you once, I've told you a million times - stop
exaggerating!"
Please reply to the list;
please *don't* CC me.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2018-03-07 11:00:17 UTC
Permalink
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.

圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version will work any better with
the components on my machine (Nextbook Flexx 11) than the most recent
release candidate? Specifically, the sound, microphone, power button,
camera, screen rotation detection and screen casting do not currently work
with Android-x86 7.1-rc2 (Nougat-x86). Are there updated mods in this
release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Shawn Peterman
2018-03-07 17:52:13 UTC
Permalink
First of all THANK YOU for all the work you've done to get hardware like
mine working! I found a thread where you said to copy bytcrrt5640.state
from Phoenix OS 2.5.9 iso and three scripts that you wrote to bring the
sound up. Great! I'm about to try it. When I get bytcrrt5640.state, where
do I put it to make it work? Will this work with 7.1 rc2 or do I need to
install 7.1 r1?
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version will work any better
with the components on my machine (Nextbook Flexx 11) than the most recent
release candidate? Specifically, the sound, microphone, power button,
camera, screen rotation detection and screen casting do not currently work
with Android-x86 7.1-rc2 (Nougat-x86). Are there updated mods in this
release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2018-03-07 18:12:25 UTC
Permalink
delete Android x86 7.1 rc2 or r1 etc/alsa/bytcrrt5640.statecopy Phoenix os
bytcrrt5640.state to 7.1 rc2 or r1 to etc/alsa folder.

圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done to get hardware like
mine working! I found a thread where you said to copy bytcrrt5640.state
from Phoenix OS 2.5.9 iso and three scripts that you wrote to bring the
sound up. Great! I'm about to try it. When I get bytcrrt5640.state, where
do I put it to make it work? Will this work with 7.1 rc2 or do I need to
install 7.1 r1?
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version will work any better
with the components on my machine (Nextbook Flexx 11) than the most recent
release candidate? Specifically, the sound, microphone, power button,
camera, screen rotation detection and screen casting do not currently work
with Android-x86 7.1-rc2 (Nougat-x86). Are there updated mods in this
release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2018-03-07 18:17:17 UTC
Permalink
delete Androidx86 etc/alsa/bytcrrt5640.statecopy PhoenixOS
bytcrrt5640.state to Androidx86 etc/alsa folder.

圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done to get hardware like
mine working! I found a thread where you said to copy bytcrrt5640.state
from Phoenix OS 2.5.9 iso and three scripts that you wrote to bring the
sound up. Great! I'm about to try it. When I get bytcrrt5640.state, where
do I put it to make it work? Will this work with 7.1 rc2 or do I need to
install 7.1 r1?
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version will work any better
with the components on my machine (Nextbook Flexx 11) than the most recent
release candidate? Specifically, the sound, microphone, power button,
camera, screen rotation detection and screen casting do not currently work
with Android-x86 7.1-rc2 (Nougat-x86). Are there updated mods in this
release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Shawn Peterman
2018-03-07 18:21:14 UTC
Permalink
Brilliant! Thank you. About to try that now...
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy PhoenixOS
bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done to get hardware like
mine working! I found a thread where you said to copy bytcrrt5640.state
from Phoenix OS 2.5.9 iso and three scripts that you wrote to bring the
sound up. Great! I'm about to try it. When I get bytcrrt5640.state, where
do I put it to make it work? Will this work with 7.1 rc2 or do I need to
install 7.1 r1?
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version will work any better
with the components on my machine (Nextbook Flexx 11) than the most recent
release candidate? Specifically, the sound, microphone, power button,
camera, screen rotation detection and screen casting do not currently work
with Android-x86 7.1-rc2 (Nougat-x86). Are there updated mods in this
release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Shawn Peterman
2018-03-07 20:36:14 UTC
Permalink
It works! You are a genius...
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy PhoenixOS
bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done to get hardware like
mine working! I found a thread where you said to copy bytcrrt5640.state
from Phoenix OS 2.5.9 iso and three scripts that you wrote to bring the
sound up. Great! I'm about to try it. When I get bytcrrt5640.state, where
do I put it to make it work? Will this work with 7.1 rc2 or do I need to
install 7.1 r1?
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version will work any better
with the components on my machine (Nextbook Flexx 11) than the most recent
release candidate? Specifically, the sound, microphone, power button,
camera, screen rotation detection and screen casting do not currently work
with Android-x86 7.1-rc2 (Nougat-x86). Are there updated mods in this
release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2018-03-08 02:18:00 UTC
Permalink
edit system/etc/modules.blacklistdelete "deferred soc_button_array".

圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy PhoenixOS
bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done to get hardware like
mine working! I found a thread where you said to copy bytcrrt5640.state
from Phoenix OS 2.5.9 iso and three scripts that you wrote to bring the
sound up. Great! I'm about to try it. When I get bytcrrt5640.state, where
do I put it to make it work? Will this work with 7.1 rc2 or do I need to
install 7.1 r1?
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version will work any better
with the components on my machine (Nextbook Flexx 11) than the most recent
release candidate? Specifically, the sound, microphone, power button,
camera, screen rotation detection and screen casting do not currently work
with Android-x86 7.1-rc2 (Nougat-x86). Are there updated mods in this
release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Shawn Peterman
2018-03-08 04:43:14 UTC
Permalink
Okay, what's that for?
Post by youling 257
edit system/etc/modules.blacklistdelete "deferred soc_button_array".
圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy PhoenixOS
bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done to get hardware
like mine working! I found a thread where you said to copy
bytcrrt5640.state from Phoenix OS 2.5.9 iso and three scripts that you
wrote to bring the sound up. Great! I'm about to try it. When I get
bytcrrt5640.state, where do I put it to make it work? Will this work with
7.1 rc2 or do I need to install 7.1 r1?
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version will work any better
with the components on my machine (Nextbook Flexx 11) than the most recent
release candidate? Specifically, the sound, microphone, power button,
camera, screen rotation detection and screen casting do not currently work
with Android-x86 7.1-rc2 (Nougat-x86). Are there updated mods in this
release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2018-03-08 06:16:28 UTC
Permalink
where you found the 52KB bytcrrt5640.state ?

圚 2018幎3月8日星期四 UTC+8䞋午12:43:14Shawn Peterman写道
Post by Shawn Peterman
Okay, what's that for?
Post by youling 257
edit system/etc/modules.blacklistdelete "deferred soc_button_array".
圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy PhoenixOS
bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done to get hardware
like mine working! I found a thread where you said to copy
bytcrrt5640.state from Phoenix OS 2.5.9 iso and three scripts that you
wrote to bring the sound up. Great! I'm about to try it. When I get
bytcrrt5640.state, where do I put it to make it work? Will this work with
7.1 rc2 or do I need to install 7.1 r1?
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version will work any
better with the components on my machine (Nextbook Flexx 11) than the most
recent release candidate? Specifically, the sound, microphone, power
button, camera, screen rotation detection and screen casting do not
currently work with Android-x86 7.1-rc2 (Nougat-x86). Are there updated
mods in this release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Shawn Peterman
2018-03-08 06:21:07 UTC
Permalink
From your
post. https://groups.google.com/d/msg/android-x86/2Q6-JvAq0wY/n2yf2_q0AAAJ
Post by youling 257
where you found the 52KB bytcrrt5640.state ?
圚 2018幎3月8日星期四 UTC+8䞋午12:43:14Shawn Peterman写道
Post by Shawn Peterman
Okay, what's that for?
Post by youling 257
edit system/etc/modules.blacklistdelete "deferred soc_button_array".
圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy PhoenixOS
bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done to get hardware
like mine working! I found a thread where you said to copy
bytcrrt5640.state from Phoenix OS 2.5.9 iso and three scripts that you
wrote to bring the sound up. Great! I'm about to try it. When I get
bytcrrt5640.state, where do I put it to make it work? Will this work with
7.1 rc2 or do I need to install 7.1 r1?
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version will work any
better with the components on my machine (Nextbook Flexx 11) than the most
recent release candidate? Specifically, the sound, microphone, power
button, camera, screen rotation detection and screen casting do not
currently work with Android-x86 7.1-rc2 (Nougat-x86). Are there updated
mods in this release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2018-03-08 06:38:30 UTC
Permalink
no matter49 KB is utf/LF for (Linux/Android)52 KB is utf8/CRLF for
(Windows)jota+ app open them.

圚 2018幎3月8日星期四 UTC+8䞋午2:21:08Shawn Peterman写道
From your post.
https://groups.google.com/d/msg/android-x86/2Q6-JvAq0wY/n2yf2_q0AAAJ
Post by youling 257
where you found the 52KB bytcrrt5640.state ?
圚 2018幎3月8日星期四 UTC+8䞋午12:43:14Shawn Peterman写道
Post by Shawn Peterman
Okay, what's that for?
Post by youling 257
edit system/etc/modules.blacklistdelete "deferred soc_button_array".
圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy PhoenixOS
bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done to get hardware
like mine working! I found a thread where you said to copy
bytcrrt5640.state from Phoenix OS 2.5.9 iso and three scripts that you
wrote to bring the sound up. Great! I'm about to try it. When I get
bytcrrt5640.state, where do I put it to make it work? Will this work with
7.1 rc2 or do I need to install 7.1 r1?
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version will work any
better with the components on my machine (Nextbook Flexx 11) than the most
recent release candidate? Specifically, the sound, microphone, power
button, camera, screen rotation detection and screen casting do not
currently work with Android-x86 7.1-rc2 (Nougat-x86). Are there updated
mods in this release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Shawn Peterman
2018-03-08 06:42:37 UTC
Permalink
It works. I couldn't get the one from the Phoenix OS copied. It wouldn't
recognize my USB ports or wifi on Live. I figured this would be similar.
Post by youling 257
no matter49 KB is utf/LF for (Linux/Android)52 KB is utf8/CRLF for
(Windows)jota+ app open them.
圚 2018幎3月8日星期四 UTC+8䞋午2:21:08Shawn Peterman写道
From your post.
https://groups.google.com/d/msg/android-x86/2Q6-JvAq0wY/n2yf2_q0AAAJ
Post by youling 257
where you found the 52KB bytcrrt5640.state ?
圚 2018幎3月8日星期四 UTC+8䞋午12:43:14Shawn Peterman写道
Post by Shawn Peterman
Okay, what's that for?
Post by youling 257
edit system/etc/modules.blacklistdelete "deferred soc_button_array".
圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy PhoenixOS
bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done to get hardware
like mine working! I found a thread where you said to copy
bytcrrt5640.state from Phoenix OS 2.5.9 iso and three scripts that you
wrote to bring the sound up. Great! I'm about to try it. When I get
bytcrrt5640.state, where do I put it to make it work? Will this work with
7.1 rc2 or do I need to install 7.1 r1?
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version will work any
better with the components on my machine (Nextbook Flexx 11) than the most
recent release candidate? Specifically, the sound, microphone, power
button, camera, screen rotation detection and screen casting do not
currently work with Android-x86 7.1-rc2 (Nougat-x86). Are there updated
mods in this release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2018-03-08 06:55:33 UTC
Permalink
the other one threadi said three method
1search found my bytcrrt5640.state fileit enable speaker、in3 internal
mic、headphone、headphone mic.
2copy Phoenix os bytcrrt5640.stateit just enable speaker and headphone
mic.
3run the three scriptthen alsa_ctl store bytcrrt5640 -f
/system/etc/alsa/bytcrrt5640.state.

圚 2018幎3月8日星期四 UTC+8䞋午2:42:38Shawn Peterman写道
Post by Shawn Peterman
It works. I couldn't get the one from the Phoenix OS copied. It wouldn't
recognize my USB ports or wifi on Live. I figured this would be similar.
Post by youling 257
no matter49 KB is utf/LF for (Linux/Android)52 KB is utf8/CRLF for
(Windows)jota+ app open them.
圚 2018幎3月8日星期四 UTC+8䞋午2:21:08Shawn Peterman写道
From your post.
https://groups.google.com/d/msg/android-x86/2Q6-JvAq0wY/n2yf2_q0AAAJ
Post by youling 257
where you found the 52KB bytcrrt5640.state ?
圚 2018幎3月8日星期四 UTC+8䞋午12:43:14Shawn Peterman写道
Post by Shawn Peterman
Okay, what's that for?
Post by youling 257
edit system/etc/modules.blacklistdelete "deferred soc_button_array".
圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy PhoenixOS
bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done to get
hardware like mine working! I found a thread where you said to copy
bytcrrt5640.state from Phoenix OS 2.5.9 iso and three scripts that you
wrote to bring the sound up. Great! I'm about to try it. When I get
bytcrrt5640.state, where do I put it to make it work? Will this work with
7.1 rc2 or do I need to install 7.1 r1?
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version will work any
better with the components on my machine (Nextbook Flexx 11) than the most
recent release candidate? Specifically, the sound, microphone, power
button, camera, screen rotation detection and screen casting do not
currently work with Android-x86 7.1-rc2 (Nougat-x86). Are there updated
mods in this release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Shawn Peterman
2018-03-08 07:42:43 UTC
Permalink
Just adding that state file I now have the speaker, mic and headset.
Unfortunately plugging in the headset does not turn off the speaker.
Post by youling 257
the other one threadi said three method
1search found my bytcrrt5640.state fileit enable speaker、in3 internal
mic、headphone、headphone mic.
2copy Phoenix os bytcrrt5640.stateit just enable speaker and headphone
mic.
3run the three scriptthen alsa_ctl store bytcrrt5640 -f
/system/etc/alsa/bytcrrt5640.state.
圚 2018幎3月8日星期四 UTC+8䞋午2:42:38Shawn Peterman写道
Post by Shawn Peterman
It works. I couldn't get the one from the Phoenix OS copied. It wouldn't
recognize my USB ports or wifi on Live. I figured this would be similar.
Post by youling 257
no matter49 KB is utf/LF for (Linux/Android)52 KB is utf8/CRLF for
(Windows)jota+ app open them.
圚 2018幎3月8日星期四 UTC+8䞋午2:21:08Shawn Peterman写道
From your post.
https://groups.google.com/d/msg/android-x86/2Q6-JvAq0wY/n2yf2_q0AAAJ
Post by youling 257
where you found the 52KB bytcrrt5640.state ?
圚 2018幎3月8日星期四 UTC+8䞋午12:43:14Shawn Peterman写道
Post by Shawn Peterman
Okay, what's that for?
Post by youling 257
edit system/etc/modules.blacklistdelete "deferred soc_button_array".
圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy PhoenixOS
bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done to get
hardware like mine working! I found a thread where you said to copy
bytcrrt5640.state from Phoenix OS 2.5.9 iso and three scripts that you
wrote to bring the sound up. Great! I'm about to try it. When I get
bytcrrt5640.state, where do I put it to make it work? Will this work with
7.1 rc2 or do I need to install 7.1 r1?
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version will work any
better with the components on my machine (Nextbook Flexx 11) than the most
recent release candidate? Specifically, the sound, microphone, power
button, camera, screen rotation detection and screen casting do not
currently work with Android-x86 7.1-rc2 (Nougat-x86). Are there updated
mods in this release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2018-03-08 08:10:59 UTC
Permalink
use this bytcrrt5640.state and Jack-detect.sh.
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/U3Cp6RGzAAAJ
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/avHLzYTLAQAJ
https://groups.google.com/forum/#!searchin/android-x86/bytcrrt5640%7Csort:date/android-x86/n14kVAauPJ8/fzRxc7EkAwAJ


圚 2018幎3月8日星期四 UTC+8䞋午3:42:43Shawn Peterman写道
Post by Shawn Peterman
Just adding that state file I now have the speaker, mic and headset.
Unfortunately plugging in the headset does not turn off the speaker.
Post by youling 257
the other one threadi said three method
1search found my bytcrrt5640.state fileit enable speaker、in3 internal
mic、headphone、headphone mic.
2copy Phoenix os bytcrrt5640.stateit just enable speaker and headphone
mic.
3run the three scriptthen alsa_ctl store bytcrrt5640 -f
/system/etc/alsa/bytcrrt5640.state.
圚 2018幎3月8日星期四 UTC+8䞋午2:42:38Shawn Peterman写道
Post by Shawn Peterman
It works. I couldn't get the one from the Phoenix OS copied. It wouldn't
recognize my USB ports or wifi on Live. I figured this would be similar.
Post by youling 257
no matter49 KB is utf/LF for (Linux/Android)52 KB is utf8/CRLF for
(Windows)jota+ app open them.
圚 2018幎3月8日星期四 UTC+8䞋午2:21:08Shawn Peterman写道
From your post.
https://groups.google.com/d/msg/android-x86/2Q6-JvAq0wY/n2yf2_q0AAAJ
Post by youling 257
where you found the 52KB bytcrrt5640.state ?
圚 2018幎3月8日星期四 UTC+8䞋午12:43:14Shawn Peterman写道
Post by Shawn Peterman
Okay, what's that for?
Post by youling 257
edit system/etc/modules.blacklistdelete "deferred
soc_button_array".
圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy PhoenixOS
bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done to get
hardware like mine working! I found a thread where you said to copy
bytcrrt5640.state from Phoenix OS 2.5.9 iso and three scripts that you
wrote to bring the sound up. Great! I'm about to try it. When I get
bytcrrt5640.state, where do I put it to make it work? Will this work with
7.1 rc2 or do I need to install 7.1 r1?
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version will work any
better with the components on my machine (Nextbook Flexx 11) than the most
recent release candidate? Specifically, the sound, microphone, power
button, camera, screen rotation detection and screen casting do not
currently work with Android-x86 7.1-rc2 (Nougat-x86). Are there updated
mods in this release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Shawn Peterman
2018-03-08 19:00:31 UTC
Permalink
Works flawlessly. Thank you again! I'll post the correct 49k in my Howto
thread.
Post by youling 257
use this bytcrrt5640.state and Jack-detect.sh.
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/U3Cp6RGzAAAJ
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/avHLzYTLAQAJ
https://groups.google.com/forum/#!searchin/android-x86/bytcrrt5640%7Csort:date/android-x86/n14kVAauPJ8/fzRxc7EkAwAJ
圚 2018幎3月8日星期四 UTC+8䞋午3:42:43Shawn Peterman写道
Post by Shawn Peterman
Just adding that state file I now have the speaker, mic and headset.
Unfortunately plugging in the headset does not turn off the speaker.
Post by youling 257
the other one threadi said three method
1search found my bytcrrt5640.state fileit enable speaker、in3 internal
mic、headphone、headphone mic.
2copy Phoenix os bytcrrt5640.stateit just enable speaker and headphone
mic.
3run the three scriptthen alsa_ctl store bytcrrt5640 -f
/system/etc/alsa/bytcrrt5640.state.
圚 2018幎3月8日星期四 UTC+8䞋午2:42:38Shawn Peterman写道
Post by Shawn Peterman
It works. I couldn't get the one from the Phoenix OS copied. It
wouldn't recognize my USB ports or wifi on Live. I figured this would be
similar.
Post by youling 257
no matter49 KB is utf/LF for (Linux/Android)52 KB is utf8/CRLF for
(Windows)jota+ app open them.
圚 2018幎3月8日星期四 UTC+8䞋午2:21:08Shawn Peterman写道
From your post.
https://groups.google.com/d/msg/android-x86/2Q6-JvAq0wY/n2yf2_q0AAAJ
Post by youling 257
where you found the 52KB bytcrrt5640.state ?
圚 2018幎3月8日星期四 UTC+8䞋午12:43:14Shawn Peterman写道
Post by Shawn Peterman
Okay, what's that for?
Post by youling 257
edit system/etc/modules.blacklistdelete "deferred soc_button_array".
圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy PhoenixOS
bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done to get
hardware like mine working! I found a thread where you said to copy
bytcrrt5640.state from Phoenix OS 2.5.9 iso and three scripts that you
wrote to bring the sound up. Great! I'm about to try it. When I get
bytcrrt5640.state, where do I put it to make it work? Will this work with
7.1 rc2 or do I need to install 7.1 r1?
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version will work
any better with the components on my machine (Nextbook Flexx 11) than the
most recent release candidate? Specifically, the sound, microphone, power
button, camera, screen rotation detection and screen casting do not
currently work with Android-x86 7.1-rc2 (Nougat-x86). Are there updated
mods in this release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Shawn Peterman
2018-03-08 19:19:37 UTC
Permalink
While I have your attention, any fix for the power button that you know of?
Post by Shawn Peterman
Works flawlessly. Thank you again! I'll post the correct 49k in my Howto
thread.
Post by youling 257
use this bytcrrt5640.state and Jack-detect.sh.
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/U3Cp6RGzAAAJ
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/avHLzYTLAQAJ
https://groups.google.com/forum/#!searchin/android-x86/bytcrrt5640%7Csort:date/android-x86/n14kVAauPJ8/fzRxc7EkAwAJ
圚 2018幎3月8日星期四 UTC+8䞋午3:42:43Shawn Peterman写道
Post by Shawn Peterman
Just adding that state file I now have the speaker, mic and headset.
Unfortunately plugging in the headset does not turn off the speaker.
Post by youling 257
the other one threadi said three method
1search found my bytcrrt5640.state fileit enable speaker、in3 internal
mic、headphone、headphone mic.
2copy Phoenix os bytcrrt5640.stateit just enable speaker and
headphone mic.
3run the three scriptthen alsa_ctl store bytcrrt5640 -f
/system/etc/alsa/bytcrrt5640.state.
圚 2018幎3月8日星期四 UTC+8䞋午2:42:38Shawn Peterman写道
Post by Shawn Peterman
It works. I couldn't get the one from the Phoenix OS copied. It
wouldn't recognize my USB ports or wifi on Live. I figured this would be
similar.
Post by youling 257
no matter49 KB is utf/LF for (Linux/Android)52 KB is utf8/CRLF for
(Windows)jota+ app open them.
圚 2018幎3月8日星期四 UTC+8䞋午2:21:08Shawn Peterman写道
From your post.
https://groups.google.com/d/msg/android-x86/2Q6-JvAq0wY/n2yf2_q0AAAJ
Post by youling 257
where you found the 52KB bytcrrt5640.state ?
圚 2018幎3月8日星期四 UTC+8䞋午12:43:14Shawn Peterman写道
Post by Shawn Peterman
Okay, what's that for?
Post by youling 257
edit system/etc/modules.blacklistdelete "deferred
soc_button_array".
圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy PhoenixOS
bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done to get
hardware like mine working! I found a thread where you said to copy
bytcrrt5640.state from Phoenix OS 2.5.9 iso and three scripts that you
wrote to bring the sound up. Great! I'm about to try it. When I get
bytcrrt5640.state, where do I put it to make it work? Will this work with
7.1 rc2 or do I need to install 7.1 r1?
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version will work
any better with the components on my machine (Nextbook Flexx 11) than the
most recent release candidate? Specifically, the sound, microphone, power
button, camera, screen rotation detection and screen casting do not
currently work with Android-x86 7.1-rc2 (Nougat-x86). Are there updated
mods in this release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2018-03-08 19:26:31 UTC
Permalink
if you press once power button to close screenlong press show optionsthis
no problem.
close screen auto rebootsuspend/resumes0i3 sleepthis other one problem.

圚 2018幎3月9日星期五 UTC+8䞊午3:19:37Shawn Peterman写道
Post by Shawn Peterman
While I have your attention, any fix for the power button that you know of?
Post by Shawn Peterman
Works flawlessly. Thank you again! I'll post the correct 49k in my Howto
thread.
Post by youling 257
use this bytcrrt5640.state and Jack-detect.sh.
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/U3Cp6RGzAAAJ
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/avHLzYTLAQAJ
https://groups.google.com/forum/#!searchin/android-x86/bytcrrt5640%7Csort:date/android-x86/n14kVAauPJ8/fzRxc7EkAwAJ
圚 2018幎3月8日星期四 UTC+8䞋午3:42:43Shawn Peterman写道
Post by Shawn Peterman
Just adding that state file I now have the speaker, mic and headset.
Unfortunately plugging in the headset does not turn off the speaker.
Post by youling 257
the other one threadi said three method
1search found my bytcrrt5640.state fileit enable speaker、in3
internal mic、headphone、headphone mic.
2copy Phoenix os bytcrrt5640.stateit just enable speaker and
headphone mic.
3run the three scriptthen alsa_ctl store bytcrrt5640 -f
/system/etc/alsa/bytcrrt5640.state.
圚 2018幎3月8日星期四 UTC+8䞋午2:42:38Shawn Peterman写道
Post by Shawn Peterman
It works. I couldn't get the one from the Phoenix OS copied. It
wouldn't recognize my USB ports or wifi on Live. I figured this would be
similar.
Post by youling 257
no matter49 KB is utf/LF for (Linux/Android)52 KB is utf8/CRLF for
(Windows)jota+ app open them.
圚 2018幎3月8日星期四 UTC+8䞋午2:21:08Shawn Peterman写道
From your post.
https://groups.google.com/d/msg/android-x86/2Q6-JvAq0wY/n2yf2_q0AAAJ
Post by youling 257
where you found the 52KB bytcrrt5640.state ?
圚 2018幎3月8日星期四 UTC+8䞋午12:43:14Shawn Peterman写道
Post by Shawn Peterman
Okay, what's that for?
Post by youling 257
edit system/etc/modules.blacklistdelete "deferred
soc_button_array".
圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy PhoenixOS
bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done to get
hardware like mine working! I found a thread where you said to copy
bytcrrt5640.state from Phoenix OS 2.5.9 iso and three scripts that you
wrote to bring the sound up. Great! I'm about to try it. When I get
bytcrrt5640.state, where do I put it to make it work? Will this work with
7.1 rc2 or do I need to install 7.1 r1?
On Wednesday, March 7, 2018 at 5:00:17 AM UTC-6, youling 257
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version will work
any better with the components on my machine (Nextbook Flexx 11) than the
most recent release candidate? Specifically, the sound, microphone, power
button, camera, screen rotation detection and screen casting do not
currently work with Android-x86 7.1-rc2 (Nougat-x86). Are there updated
mods in this release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Shawn Peterman
2018-03-08 19:31:33 UTC
Permalink
When I press once it turns off the screen. If I don't press it again within
2 seconds it reboots the machine.
Post by youling 257
if you press once power button to close screenlong press show
optionsthis no problem.
close screen auto rebootsuspend/resumes0i3 sleepthis other one problem.
圚 2018幎3月9日星期五 UTC+8䞊午3:19:37Shawn Peterman写道
Post by Shawn Peterman
While I have your attention, any fix for the power button that you know of?
Post by Shawn Peterman
Works flawlessly. Thank you again! I'll post the correct 49k in my Howto
thread.
Post by youling 257
use this bytcrrt5640.state and Jack-detect.sh.
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/U3Cp6RGzAAAJ
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/avHLzYTLAQAJ
https://groups.google.com/forum/#!searchin/android-x86/bytcrrt5640%7Csort:date/android-x86/n14kVAauPJ8/fzRxc7EkAwAJ
圚 2018幎3月8日星期四 UTC+8䞋午3:42:43Shawn Peterman写道
Post by Shawn Peterman
Just adding that state file I now have the speaker, mic and headset.
Unfortunately plugging in the headset does not turn off the speaker.
Post by youling 257
the other one threadi said three method
1search found my bytcrrt5640.state fileit enable speaker、in3
internal mic、headphone、headphone mic.
2copy Phoenix os bytcrrt5640.stateit just enable speaker and
headphone mic.
3run the three scriptthen alsa_ctl store bytcrrt5640 -f
/system/etc/alsa/bytcrrt5640.state.
圚 2018幎3月8日星期四 UTC+8䞋午2:42:38Shawn Peterman写道
Post by Shawn Peterman
It works. I couldn't get the one from the Phoenix OS copied. It
wouldn't recognize my USB ports or wifi on Live. I figured this would be
similar.
Post by youling 257
no matter49 KB is utf/LF for (Linux/Android)52 KB is utf8/CRLF
for (Windows)jota+ app open them.
圚 2018幎3月8日星期四 UTC+8䞋午2:21:08Shawn Peterman写道
From your post.
https://groups.google.com/d/msg/android-x86/2Q6-JvAq0wY/n2yf2_q0AAAJ
Post by youling 257
where you found the 52KB bytcrrt5640.state ?
圚 2018幎3月8日星期四 UTC+8䞋午12:43:14Shawn Peterman写道
Post by Shawn Peterman
Okay, what's that for?
Post by youling 257
edit system/etc/modules.blacklistdelete "deferred
soc_button_array".
圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
On Wednesday, March 7, 2018 at 12:17:17 PM UTC-6, youling 257
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy PhoenixOS
bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done to get
hardware like mine working! I found a thread where you said to copy
bytcrrt5640.state from Phoenix OS 2.5.9 iso and three scripts that you
wrote to bring the sound up. Great! I'm about to try it. When I get
bytcrrt5640.state, where do I put it to make it work? Will this work with
7.1 rc2 or do I need to install 7.1 r1?
On Wednesday, March 7, 2018 at 5:00:17 AM UTC-6, youling 257
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version will work
any better with the components on my machine (Nextbook Flexx 11) than the
most recent release candidate? Specifically, the sound, microphone, power
button, camera, screen rotation detection and screen casting do not
currently work with Android-x86 7.1-rc2 (Nougat-x86). Are there updated
mods in this release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2018-03-08 20:11:43 UTC
Permalink
echo mem > /sys/power/statewhat happen ?

圚 2018幎3月9日星期五 UTC+8䞊午3:31:33Shawn Peterman写道
Post by Shawn Peterman
When I press once it turns off the screen. If I don't press it again
within 2 seconds it reboots the machine.
Post by youling 257
if you press once power button to close screenlong press show
optionsthis no problem.
close screen auto rebootsuspend/resumes0i3 sleepthis other one problem.
圚 2018幎3月9日星期五 UTC+8䞊午3:19:37Shawn Peterman写道
Post by Shawn Peterman
While I have your attention, any fix for the power button that you know of?
Post by Shawn Peterman
Works flawlessly. Thank you again! I'll post the correct 49k in my
Howto thread.
Post by youling 257
use this bytcrrt5640.state and Jack-detect.sh.
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/U3Cp6RGzAAAJ
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/avHLzYTLAQAJ
https://groups.google.com/forum/#!searchin/android-x86/bytcrrt5640%7Csort:date/android-x86/n14kVAauPJ8/fzRxc7EkAwAJ
圚 2018幎3月8日星期四 UTC+8䞋午3:42:43Shawn Peterman写道
Post by Shawn Peterman
Just adding that state file I now have the speaker, mic and headset.
Unfortunately plugging in the headset does not turn off the speaker.
Post by youling 257
the other one threadi said three method
1search found my bytcrrt5640.state fileit enable speaker、in3
internal mic、headphone、headphone mic.
2copy Phoenix os bytcrrt5640.stateit just enable speaker and
headphone mic.
3run the three scriptthen alsa_ctl store bytcrrt5640 -f
/system/etc/alsa/bytcrrt5640.state.
圚 2018幎3月8日星期四 UTC+8䞋午2:42:38Shawn Peterman写道
Post by Shawn Peterman
It works. I couldn't get the one from the Phoenix OS copied. It
wouldn't recognize my USB ports or wifi on Live. I figured this would be
similar.
Post by youling 257
no matter49 KB is utf/LF for (Linux/Android)52 KB is utf8/CRLF
for (Windows)jota+ app open them.
圚 2018幎3月8日星期四 UTC+8䞋午2:21:08Shawn Peterman写道
From your post.
https://groups.google.com/d/msg/android-x86/2Q6-JvAq0wY/n2yf2_q0AAAJ
Post by youling 257
where you found the 52KB bytcrrt5640.state ?
圚 2018幎3月8日星期四 UTC+8䞋午12:43:14Shawn Peterman写道
Post by Shawn Peterman
Okay, what's that for?
Post by youling 257
edit system/etc/modules.blacklistdelete "deferred
soc_button_array".
圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
On Wednesday, March 7, 2018 at 12:17:17 PM UTC-6, youling 257
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy PhoenixOS
bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done to get
hardware like mine working! I found a thread where you said to copy
bytcrrt5640.state from Phoenix OS 2.5.9 iso and three scripts that you
wrote to bring the sound up. Great! I'm about to try it. When I get
bytcrrt5640.state, where do I put it to make it work? Will this work with
7.1 rc2 or do I need to install 7.1 r1?
On Wednesday, March 7, 2018 at 5:00:17 AM UTC-6, youling
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version will
work any better with the components on my machine (Nextbook Flexx 11) than
the most recent release candidate? Specifically, the sound, microphone,
power button, camera, screen rotation detection and screen casting do not
currently work with Android-x86 7.1-rc2 (Nougat-x86). Are there updated
mods in this release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Shawn Peterman
2018-03-08 20:15:23 UTC
Permalink
Nothing at all happens...
Post by youling 257
echo mem > /sys/power/statewhat happen ?
圚 2018幎3月9日星期五 UTC+8䞊午3:31:33Shawn Peterman写道
Post by Shawn Peterman
When I press once it turns off the screen. If I don't press it again
within 2 seconds it reboots the machine.
Post by youling 257
if you press once power button to close screenlong press show
optionsthis no problem.
close screen auto rebootsuspend/resumes0i3 sleepthis other one
problem.
圚 2018幎3月9日星期五 UTC+8䞊午3:19:37Shawn Peterman写道
Post by Shawn Peterman
While I have your attention, any fix for the power button that you know of?
Post by Shawn Peterman
Works flawlessly. Thank you again! I'll post the correct 49k in my
Howto thread.
Post by youling 257
use this bytcrrt5640.state and Jack-detect.sh.
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/U3Cp6RGzAAAJ
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/avHLzYTLAQAJ
https://groups.google.com/forum/#!searchin/android-x86/bytcrrt5640%7Csort:date/android-x86/n14kVAauPJ8/fzRxc7EkAwAJ
圚 2018幎3月8日星期四 UTC+8䞋午3:42:43Shawn Peterman写道
Post by Shawn Peterman
Just adding that state file I now have the speaker, mic and headset.
Unfortunately plugging in the headset does not turn off the speaker.
Post by youling 257
the other one threadi said three method
1search found my bytcrrt5640.state fileit enable speaker、in3
internal mic、headphone、headphone mic.
2copy Phoenix os bytcrrt5640.stateit just enable speaker and
headphone mic.
3run the three scriptthen alsa_ctl store bytcrrt5640 -f
/system/etc/alsa/bytcrrt5640.state.
圚 2018幎3月8日星期四 UTC+8䞋午2:42:38Shawn Peterman写道
Post by Shawn Peterman
It works. I couldn't get the one from the Phoenix OS copied. It
wouldn't recognize my USB ports or wifi on Live. I figured this would be
similar.
Post by youling 257
no matter49 KB is utf/LF for (Linux/Android)52 KB is utf8/CRLF
for (Windows)jota+ app open them.
圚 2018幎3月8日星期四 UTC+8䞋午2:21:08Shawn Peterman写道
From your post.
https://groups.google.com/d/msg/android-x86/2Q6-JvAq0wY/n2yf2_q0AAAJ
Post by youling 257
where you found the 52KB bytcrrt5640.state ?
圚 2018幎3月8日星期四 UTC+8䞋午12:43:14Shawn Peterman写道
Post by Shawn Peterman
Okay, what's that for?
Post by youling 257
edit system/etc/modules.blacklistdelete "deferred
soc_button_array".
圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
On Wednesday, March 7, 2018 at 12:17:17 PM UTC-6, youling
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy PhoenixOS
bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done to get
hardware like mine working! I found a thread where you said to copy
bytcrrt5640.state from Phoenix OS 2.5.9 iso and three scripts that you
wrote to bring the sound up. Great! I'm about to try it. When I get
bytcrrt5640.state, where do I put it to make it work? Will this work with
7.1 rc2 or do I need to install 7.1 r1?
On Wednesday, March 7, 2018 at 5:00:17 AM UTC-6, youling
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version will
work any better with the components on my machine (Nextbook Flexx 11) than
the most recent release candidate? Specifically, the sound, microphone,
power button, camera, screen rotation detection and screen casting do not
currently work with Android-x86 7.1-rc2 (Nougat-x86). Are there updated
mods in this release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Shawn Peterman
2018-03-08 20:16:14 UTC
Permalink
'cat /sys/power/state' shows 'freeze'
Post by Shawn Peterman
Nothing at all happens...
Post by youling 257
echo mem > /sys/power/statewhat happen ?
圚 2018幎3月9日星期五 UTC+8䞊午3:31:33Shawn Peterman写道
Post by Shawn Peterman
When I press once it turns off the screen. If I don't press it again
within 2 seconds it reboots the machine.
Post by youling 257
if you press once power button to close screenlong press show
optionsthis no problem.
close screen auto rebootsuspend/resumes0i3 sleepthis other one
problem.
圚 2018幎3月9日星期五 UTC+8䞊午3:19:37Shawn Peterman写道
Post by Shawn Peterman
While I have your attention, any fix for the power button that you know of?
Post by Shawn Peterman
Works flawlessly. Thank you again! I'll post the correct 49k in my
Howto thread.
Post by youling 257
use this bytcrrt5640.state and Jack-detect.sh.
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/U3Cp6RGzAAAJ
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/avHLzYTLAQAJ
https://groups.google.com/forum/#!searchin/android-x86/bytcrrt5640%7Csort:date/android-x86/n14kVAauPJ8/fzRxc7EkAwAJ
圚 2018幎3月8日星期四 UTC+8䞋午3:42:43Shawn Peterman写道
Post by Shawn Peterman
Just adding that state file I now have the speaker, mic and
headset. Unfortunately plugging in the headset does not turn off the
speaker.
Post by youling 257
the other one threadi said three method
1search found my bytcrrt5640.state fileit enable speaker、in3
internal mic、headphone、headphone mic.
2copy Phoenix os bytcrrt5640.stateit just enable speaker and
headphone mic.
3run the three scriptthen alsa_ctl store bytcrrt5640 -f
/system/etc/alsa/bytcrrt5640.state.
圚 2018幎3月8日星期四 UTC+8䞋午2:42:38Shawn Peterman写道
Post by Shawn Peterman
It works. I couldn't get the one from the Phoenix OS copied. It
wouldn't recognize my USB ports or wifi on Live. I figured this would be
similar.
Post by youling 257
no matter49 KB is utf/LF for (Linux/Android)52 KB is utf8/CRLF
for (Windows)jota+ app open them.
圚 2018幎3月8日星期四 UTC+8䞋午2:21:08Shawn Peterman写道
From your post.
https://groups.google.com/d/msg/android-x86/2Q6-JvAq0wY/n2yf2_q0AAAJ
Post by youling 257
where you found the 52KB bytcrrt5640.state ?
圚 2018幎3月8日星期四 UTC+8䞋午12:43:14Shawn Peterman写道
Post by Shawn Peterman
Okay, what's that for?
On Wednesday, March 7, 2018 at 8:18:00 PM UTC-6, youling 257
Post by youling 257
edit system/etc/modules.blacklistdelete "deferred
soc_button_array".
圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
On Wednesday, March 7, 2018 at 12:17:17 PM UTC-6, youling
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy
PhoenixOS bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done to
get hardware like mine working! I found a thread where you said to copy
bytcrrt5640.state from Phoenix OS 2.5.9 iso and three scripts that you
wrote to bring the sound up. Great! I'm about to try it. When I get
bytcrrt5640.state, where do I put it to make it work? Will this work with
7.1 rc2 or do I need to install 7.1 r1?
On Wednesday, March 7, 2018 at 5:00:17 AM UTC-6, youling
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version will
work any better with the components on my machine (Nextbook Flexx 11) than
the most recent release candidate? Specifically, the sound, microphone,
power button, camera, screen rotation detection and screen casting do not
currently work with Android-x86 7.1-rc2 (Nougat-x86). Are there updated
mods in this release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2018-03-08 20:23:27 UTC
Permalink
echo freeze > /sys/power/state

圚 2018幎3月9日星期五 UTC+8䞊午4:16:14Shawn Peterman写道
Post by Shawn Peterman
'cat /sys/power/state' shows 'freeze'
Post by Shawn Peterman
Nothing at all happens...
Post by youling 257
echo mem > /sys/power/statewhat happen ?
圚 2018幎3月9日星期五 UTC+8䞊午3:31:33Shawn Peterman写道
Post by Shawn Peterman
When I press once it turns off the screen. If I don't press it again
within 2 seconds it reboots the machine.
Post by youling 257
if you press once power button to close screenlong press show
optionsthis no problem.
close screen auto rebootsuspend/resumes0i3 sleepthis other one
problem.
圚 2018幎3月9日星期五 UTC+8䞊午3:19:37Shawn Peterman写道
Post by Shawn Peterman
While I have your attention, any fix for the power button that you know of?
Post by Shawn Peterman
Works flawlessly. Thank you again! I'll post the correct 49k in my
Howto thread.
Post by youling 257
use this bytcrrt5640.state and Jack-detect.sh.
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/U3Cp6RGzAAAJ
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/avHLzYTLAQAJ
https://groups.google.com/forum/#!searchin/android-x86/bytcrrt5640%7Csort:date/android-x86/n14kVAauPJ8/fzRxc7EkAwAJ
圚 2018幎3月8日星期四 UTC+8䞋午3:42:43Shawn Peterman写道
Post by Shawn Peterman
Just adding that state file I now have the speaker, mic and
headset. Unfortunately plugging in the headset does not turn off the
speaker.
Post by youling 257
the other one threadi said three method
1search found my bytcrrt5640.state fileit enable speaker、in3
internal mic、headphone、headphone mic.
2copy Phoenix os bytcrrt5640.stateit just enable speaker and
headphone mic.
3run the three scriptthen alsa_ctl store bytcrrt5640 -f
/system/etc/alsa/bytcrrt5640.state.
圚 2018幎3月8日星期四 UTC+8䞋午2:42:38Shawn Peterman写道
Post by Shawn Peterman
It works. I couldn't get the one from the Phoenix OS copied. It
wouldn't recognize my USB ports or wifi on Live. I figured this would be
similar.
Post by youling 257
no matter49 KB is utf/LF for (Linux/Android)52 KB is
utf8/CRLF for (Windows)jota+ app open them.
圚 2018幎3月8日星期四 UTC+8䞋午2:21:08Shawn Peterman写道
From your post.
https://groups.google.com/d/msg/android-x86/2Q6-JvAq0wY/n2yf2_q0AAAJ
Post by youling 257
where you found the 52KB bytcrrt5640.state ?
圚 2018幎3月8日星期四 UTC+8䞋午12:43:14Shawn Peterman写道
Post by Shawn Peterman
Okay, what's that for?
On Wednesday, March 7, 2018 at 8:18:00 PM UTC-6, youling 257
Post by youling 257
edit system/etc/modules.blacklistdelete "deferred
soc_button_array".
圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
On Wednesday, March 7, 2018 at 12:17:17 PM UTC-6, youling
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy
PhoenixOS bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done to
get hardware like mine working! I found a thread where you said to copy
bytcrrt5640.state from Phoenix OS 2.5.9 iso and three scripts that you
wrote to bring the sound up. Great! I'm about to try it. When I get
bytcrrt5640.state, where do I put it to make it work? Will this work with
7.1 rc2 or do I need to install 7.1 r1?
On Wednesday, March 7, 2018 at 5:00:17 AM UTC-6, youling
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version will
work any better with the components on my machine (Nextbook Flexx 11) than
the most recent release candidate? Specifically, the sound, microphone,
power button, camera, screen rotation detection and screen casting do not
currently work with Android-x86 7.1-rc2 (Nougat-x86). Are there updated
mods in this release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Shawn Peterman
2018-03-08 20:36:22 UTC
Permalink
'echo freeze > /sys/power/state' reboots the device
Post by youling 257
echo freeze > /sys/power/state
圚 2018幎3月9日星期五 UTC+8䞊午4:16:14Shawn Peterman写道
Post by Shawn Peterman
'cat /sys/power/state' shows 'freeze'
Post by Shawn Peterman
Nothing at all happens...
Post by youling 257
echo mem > /sys/power/statewhat happen ?
圚 2018幎3月9日星期五 UTC+8䞊午3:31:33Shawn Peterman写道
Post by Shawn Peterman
When I press once it turns off the screen. If I don't press it again
within 2 seconds it reboots the machine.
Post by youling 257
if you press once power button to close screenlong press show
optionsthis no problem.
close screen auto rebootsuspend/resumes0i3 sleepthis other one
problem.
圚 2018幎3月9日星期五 UTC+8䞊午3:19:37Shawn Peterman写道
Post by Shawn Peterman
While I have your attention, any fix for the power button that you know of?
Post by Shawn Peterman
Works flawlessly. Thank you again! I'll post the correct 49k in my
Howto thread.
Post by youling 257
use this bytcrrt5640.state and Jack-detect.sh.
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/U3Cp6RGzAAAJ
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/avHLzYTLAQAJ
https://groups.google.com/forum/#!searchin/android-x86/bytcrrt5640%7Csort:date/android-x86/n14kVAauPJ8/fzRxc7EkAwAJ
圚 2018幎3月8日星期四 UTC+8䞋午3:42:43Shawn Peterman写道
Post by Shawn Peterman
Just adding that state file I now have the speaker, mic and
headset. Unfortunately plugging in the headset does not turn off the
speaker.
Post by youling 257
the other one threadi said three method
1search found my bytcrrt5640.state fileit enable speaker、in3
internal mic、headphone、headphone mic.
2copy Phoenix os bytcrrt5640.stateit just enable speaker and
headphone mic.
3run the three scriptthen alsa_ctl store bytcrrt5640 -f
/system/etc/alsa/bytcrrt5640.state.
圚 2018幎3月8日星期四 UTC+8䞋午2:42:38Shawn Peterman写道
Post by Shawn Peterman
It works. I couldn't get the one from the Phoenix OS copied. It
wouldn't recognize my USB ports or wifi on Live. I figured this would be
similar.
Post by youling 257
no matter49 KB is utf/LF for (Linux/Android)52 KB is
utf8/CRLF for (Windows)jota+ app open them.
圚 2018幎3月8日星期四 UTC+8䞋午2:21:08Shawn Peterman写道
From your post.
https://groups.google.com/d/msg/android-x86/2Q6-JvAq0wY/n2yf2_q0AAAJ
On Thursday, March 8, 2018 at 12:16:28 AM UTC-6, youling 257
Post by youling 257
where you found the 52KB bytcrrt5640.state ?
圚 2018幎3月8日星期四 UTC+8䞋午12:43:14Shawn Peterman写道
Post by Shawn Peterman
Okay, what's that for?
On Wednesday, March 7, 2018 at 8:18:00 PM UTC-6, youling
Post by youling 257
edit system/etc/modules.blacklistdelete "deferred
soc_button_array".
圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
On Wednesday, March 7, 2018 at 12:17:17 PM UTC-6, youling
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy
PhoenixOS bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done to
get hardware like mine working! I found a thread where you said to copy
bytcrrt5640.state from Phoenix OS 2.5.9 iso and three scripts that you
wrote to bring the sound up. Great! I'm about to try it. When I get
bytcrrt5640.state, where do I put it to make it work? Will this work with
7.1 rc2 or do I need to install 7.1 r1?
On Wednesday, March 7, 2018 at 5:00:17 AM UTC-6,
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version will
work any better with the components on my machine (Nextbook Flexx 11) than
the most recent release candidate? Specifically, the sound, microphone,
power button, camera, screen rotation detection and screen casting do not
currently work with Android-x86 7.1-rc2 (Nougat-x86). Are there updated
mods in this release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Shawn Peterman
2018-03-14 15:51:24 UTC
Permalink
If I could bother you with one more thing, the sound works now after your
help, but it's very quiet and the mic doesn't pick up well. On my Linux
systems with Alsa I just run sudo alsamixer from the CLI and set it up.
While I can find plenty of apps to boost speaker volume, none of them have
any adjustments for the mic. I'm guessing it has to do with alsa_amixer but
I'm not all that sure what to do. Any help?
Post by youling 257
echo freeze > /sys/power/state
圚 2018幎3月9日星期五 UTC+8䞊午4:16:14Shawn Peterman写道
Post by Shawn Peterman
'cat /sys/power/state' shows 'freeze'
Post by Shawn Peterman
Nothing at all happens...
Post by youling 257
echo mem > /sys/power/statewhat happen ?
圚 2018幎3月9日星期五 UTC+8䞊午3:31:33Shawn Peterman写道
Post by Shawn Peterman
When I press once it turns off the screen. If I don't press it again
within 2 seconds it reboots the machine.
Post by youling 257
if you press once power button to close screenlong press show
optionsthis no problem.
close screen auto rebootsuspend/resumes0i3 sleepthis other one
problem.
圚 2018幎3月9日星期五 UTC+8䞊午3:19:37Shawn Peterman写道
Post by Shawn Peterman
While I have your attention, any fix for the power button that you know of?
Post by Shawn Peterman
Works flawlessly. Thank you again! I'll post the correct 49k in my
Howto thread.
Post by youling 257
use this bytcrrt5640.state and Jack-detect.sh.
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/U3Cp6RGzAAAJ
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/avHLzYTLAQAJ
https://groups.google.com/forum/#!searchin/android-x86/bytcrrt5640%7Csort:date/android-x86/n14kVAauPJ8/fzRxc7EkAwAJ
圚 2018幎3月8日星期四 UTC+8䞋午3:42:43Shawn Peterman写道
Post by Shawn Peterman
Just adding that state file I now have the speaker, mic and
headset. Unfortunately plugging in the headset does not turn off the
speaker.
Post by youling 257
the other one threadi said three method
1search found my bytcrrt5640.state fileit enable speaker、in3
internal mic、headphone、headphone mic.
2copy Phoenix os bytcrrt5640.stateit just enable speaker and
headphone mic.
3run the three scriptthen alsa_ctl store bytcrrt5640 -f
/system/etc/alsa/bytcrrt5640.state.
圚 2018幎3月8日星期四 UTC+8䞋午2:42:38Shawn Peterman写道
Post by Shawn Peterman
It works. I couldn't get the one from the Phoenix OS copied. It
wouldn't recognize my USB ports or wifi on Live. I figured this would be
similar.
Post by youling 257
no matter49 KB is utf/LF for (Linux/Android)52 KB is
utf8/CRLF for (Windows)jota+ app open them.
圚 2018幎3月8日星期四 UTC+8䞋午2:21:08Shawn Peterman写道
From your post.
https://groups.google.com/d/msg/android-x86/2Q6-JvAq0wY/n2yf2_q0AAAJ
On Thursday, March 8, 2018 at 12:16:28 AM UTC-6, youling 257
Post by youling 257
where you found the 52KB bytcrrt5640.state ?
圚 2018幎3月8日星期四 UTC+8䞋午12:43:14Shawn Peterman写道
Post by Shawn Peterman
Okay, what's that for?
On Wednesday, March 7, 2018 at 8:18:00 PM UTC-6, youling
Post by youling 257
edit system/etc/modules.blacklistdelete "deferred
soc_button_array".
圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
On Wednesday, March 7, 2018 at 12:17:17 PM UTC-6, youling
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy
PhoenixOS bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done to
get hardware like mine working! I found a thread where you said to copy
bytcrrt5640.state from Phoenix OS 2.5.9 iso and three scripts that you
wrote to bring the sound up. Great! I'm about to try it. When I get
bytcrrt5640.state, where do I put it to make it work? Will this work with
7.1 rc2 or do I need to install 7.1 r1?
On Wednesday, March 7, 2018 at 5:00:17 AM UTC-6,
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version will
work any better with the components on my machine (Nextbook Flexx 11) than
the most recent release candidate? Specifically, the sound, microphone,
power button, camera, screen rotation detection and screen casting do not
currently work with Android-x86 7.1-rc2 (Nougat-x86). Are there updated
mods in this release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2018-03-14 17:14:42 UTC
Permalink
Nextbook use IN3_MAP for internal micwhat's your dmesg | grep 5640 ?
https://github.com/burzumishi/linux-baytrail-flexx10/issues/7#issuecomment-261699684

圚 2018幎3月14日星期䞉 UTC+8䞋午11:51:24Shawn Peterman写道
Post by Shawn Peterman
If I could bother you with one more thing, the sound works now after your
help, but it's very quiet and the mic doesn't pick up well. On my Linux
systems with Alsa I just run sudo alsamixer from the CLI and set it up.
While I can find plenty of apps to boost speaker volume, none of them have
any adjustments for the mic. I'm guessing it has to do with alsa_amixer but
I'm not all that sure what to do. Any help?
Post by youling 257
echo freeze > /sys/power/state
圚 2018幎3月9日星期五 UTC+8䞊午4:16:14Shawn Peterman写道
Post by Shawn Peterman
'cat /sys/power/state' shows 'freeze'
Post by Shawn Peterman
Nothing at all happens...
Post by youling 257
echo mem > /sys/power/statewhat happen ?
圚 2018幎3月9日星期五 UTC+8䞊午3:31:33Shawn Peterman写道
Post by Shawn Peterman
When I press once it turns off the screen. If I don't press it again
within 2 seconds it reboots the machine.
Post by youling 257
if you press once power button to close screenlong press show
optionsthis no problem.
close screen auto rebootsuspend/resumes0i3 sleepthis other one
problem.
圚 2018幎3月9日星期五 UTC+8䞊午3:19:37Shawn Peterman写道
Post by Shawn Peterman
While I have your attention, any fix for the power button that you know of?
Post by Shawn Peterman
Works flawlessly. Thank you again! I'll post the correct 49k in my
Howto thread.
Post by youling 257
use this bytcrrt5640.state and Jack-detect.sh.
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/U3Cp6RGzAAAJ
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/avHLzYTLAQAJ
https://groups.google.com/forum/#!searchin/android-x86/bytcrrt5640%7Csort:date/android-x86/n14kVAauPJ8/fzRxc7EkAwAJ
圚 2018幎3月8日星期四 UTC+8䞋午3:42:43Shawn Peterman写道
Post by Shawn Peterman
Just adding that state file I now have the speaker, mic and
headset. Unfortunately plugging in the headset does not turn off the
speaker.
Post by youling 257
the other one threadi said three method
1search found my bytcrrt5640.state fileit enable speaker、in3
internal mic、headphone、headphone mic.
2copy Phoenix os bytcrrt5640.stateit just enable speaker and
headphone mic.
3run the three scriptthen alsa_ctl store bytcrrt5640 -f
/system/etc/alsa/bytcrrt5640.state.
圚 2018幎3月8日星期四 UTC+8䞋午2:42:38Shawn Peterman写道
Post by Shawn Peterman
It works. I couldn't get the one from the Phoenix OS copied.
It wouldn't recognize my USB ports or wifi on Live. I figured this would be
similar.
Post by youling 257
no matter49 KB is utf/LF for (Linux/Android)52 KB is
utf8/CRLF for (Windows)jota+ app open them.
圚 2018幎3月8日星期四 UTC+8䞋午2:21:08Shawn Peterman写道
From your post.
https://groups.google.com/d/msg/android-x86/2Q6-JvAq0wY/n2yf2_q0AAAJ
On Thursday, March 8, 2018 at 12:16:28 AM UTC-6, youling 257
Post by youling 257
where you found the 52KB bytcrrt5640.state ?
圚 2018幎3月8日星期四 UTC+8䞋午12:43:14Shawn Peterman写道
Post by Shawn Peterman
Okay, what's that for?
On Wednesday, March 7, 2018 at 8:18:00 PM UTC-6, youling
Post by youling 257
edit system/etc/modules.blacklistdelete "deferred
soc_button_array".
圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
On Wednesday, March 7, 2018 at 12:17:17 PM UTC-6,
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy
PhoenixOS bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done to
get hardware like mine working! I found a thread where you said to copy
bytcrrt5640.state from Phoenix OS 2.5.9 iso and three scripts that you
wrote to bring the sound up. Great! I'm about to try it. When I get
bytcrrt5640.state, where do I put it to make it work? Will this work with
7.1 rc2 or do I need to install 7.1 r1?
On Wednesday, March 7, 2018 at 5:00:17 AM UTC-6,
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version
will work any better with the components on my machine (Nextbook Flexx 11)
than the most recent release candidate? Specifically, the sound,
microphone, power button, camera, screen rotation detection and screen
casting do not currently work with Android-x86 7.1-rc2 (Nougat-x86). Are
there updated mods in this release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Shawn Peterman
2018-03-14 17:33:54 UTC
Permalink
No output from 'dmesg | grep 5640'
Post by youling 257
Nextbook use IN3_MAP for internal micwhat's your dmesg | grep 5640 ?
https://github.com/burzumishi/linux-baytrail-flexx10/issues/7#issuecomment-261699684
圚 2018幎3月14日星期䞉 UTC+8䞋午11:51:24Shawn Peterman写道
Post by Shawn Peterman
If I could bother you with one more thing, the sound works now after your
help, but it's very quiet and the mic doesn't pick up well. On my Linux
systems with Alsa I just run sudo alsamixer from the CLI and set it up.
While I can find plenty of apps to boost speaker volume, none of them have
any adjustments for the mic. I'm guessing it has to do with alsa_amixer but
I'm not all that sure what to do. Any help?
Post by youling 257
echo freeze > /sys/power/state
圚 2018幎3月9日星期五 UTC+8䞊午4:16:14Shawn Peterman写道
Post by Shawn Peterman
'cat /sys/power/state' shows 'freeze'
Post by Shawn Peterman
Nothing at all happens...
Post by youling 257
echo mem > /sys/power/statewhat happen ?
圚 2018幎3月9日星期五 UTC+8䞊午3:31:33Shawn Peterman写道
Post by Shawn Peterman
When I press once it turns off the screen. If I don't press it again
within 2 seconds it reboots the machine.
Post by youling 257
if you press once power button to close screenlong press show
optionsthis no problem.
close screen auto rebootsuspend/resumes0i3 sleepthis other one
problem.
圚 2018幎3月9日星期五 UTC+8䞊午3:19:37Shawn Peterman写道
Post by Shawn Peterman
While I have your attention, any fix for the power button that you know of?
Post by Shawn Peterman
Works flawlessly. Thank you again! I'll post the correct 49k in
my Howto thread.
Post by youling 257
use this bytcrrt5640.state and Jack-detect.sh.
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/U3Cp6RGzAAAJ
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/avHLzYTLAQAJ
https://groups.google.com/forum/#!searchin/android-x86/bytcrrt5640%7Csort:date/android-x86/n14kVAauPJ8/fzRxc7EkAwAJ
圚 2018幎3月8日星期四 UTC+8䞋午3:42:43Shawn Peterman写道
Post by Shawn Peterman
Just adding that state file I now have the speaker, mic and
headset. Unfortunately plugging in the headset does not turn off the
speaker.
Post by youling 257
the other one threadi said three method
1search found my bytcrrt5640.state fileit enable speaker、in3
internal mic、headphone、headphone mic.
2copy Phoenix os bytcrrt5640.stateit just enable speaker and
headphone mic.
3run the three scriptthen alsa_ctl store bytcrrt5640 -f
/system/etc/alsa/bytcrrt5640.state.
圚 2018幎3月8日星期四 UTC+8䞋午2:42:38Shawn Peterman写道
Post by Shawn Peterman
It works. I couldn't get the one from the Phoenix OS copied.
It wouldn't recognize my USB ports or wifi on Live. I figured this would be
similar.
On Thursday, March 8, 2018 at 12:38:30 AM UTC-6, youling 257
Post by youling 257
no matter49 KB is utf/LF for (Linux/Android)52 KB is
utf8/CRLF for (Windows)jota+ app open them.
圚 2018幎3月8日星期四 UTC+8䞋午2:21:08Shawn Peterman写道
From your post.
https://groups.google.com/d/msg/android-x86/2Q6-JvAq0wY/n2yf2_q0AAAJ
On Thursday, March 8, 2018 at 12:16:28 AM UTC-6, youling
Post by youling 257
where you found the 52KB bytcrrt5640.state ?
圚 2018幎3月8日星期四 UTC+8䞋午12:43:14Shawn Peterman写道
Post by Shawn Peterman
Okay, what's that for?
On Wednesday, March 7, 2018 at 8:18:00 PM UTC-6, youling
Post by youling 257
edit system/etc/modules.blacklistdelete "deferred
soc_button_array".
圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
On Wednesday, March 7, 2018 at 12:17:17 PM UTC-6,
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy
PhoenixOS bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done
to get hardware like mine working! I found a thread where you said to copy
bytcrrt5640.state from Phoenix OS 2.5.9 iso and three scripts that you
wrote to bring the sound up. Great! I'm about to try it. When I get
bytcrrt5640.state, where do I put it to make it work? Will this work with
7.1 rc2 or do I need to install 7.1 r1?
On Wednesday, March 7, 2018 at 5:00:17 AM UTC-6,
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version
will work any better with the components on my machine (Nextbook Flexx 11)
than the most recent release candidate? Specifically, the sound,
microphone, power button, camera, screen rotation detection and screen
casting do not currently work with Android-x86 7.1-rc2 (Nougat-x86). Are
there updated mods in this release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2018-03-14 17:41:16 UTC
Permalink
rebootalt+f1dmesg > /sdcard/dmesg.txtdmesg | grep 5640
do you know how to output dmesg ?

圚 2018幎3月15日星期四 UTC+8䞊午1:33:55Shawn Peterman写道
Post by Shawn Peterman
No output from 'dmesg | grep 5640'
Post by youling 257
Nextbook use IN3_MAP for internal micwhat's your dmesg | grep 5640 ?
https://github.com/burzumishi/linux-baytrail-flexx10/issues/7#issuecomment-261699684
圚 2018幎3月14日星期䞉 UTC+8䞋午11:51:24Shawn Peterman写道
Post by Shawn Peterman
If I could bother you with one more thing, the sound works now after
your help, but it's very quiet and the mic doesn't pick up well. On my
Linux systems with Alsa I just run sudo alsamixer from the CLI and set it
up. While I can find plenty of apps to boost speaker volume, none of them
have any adjustments for the mic. I'm guessing it has to do with
alsa_amixer but I'm not all that sure what to do. Any help?
Post by youling 257
echo freeze > /sys/power/state
圚 2018幎3月9日星期五 UTC+8䞊午4:16:14Shawn Peterman写道
Post by Shawn Peterman
'cat /sys/power/state' shows 'freeze'
Post by Shawn Peterman
Nothing at all happens...
Post by youling 257
echo mem > /sys/power/statewhat happen ?
圚 2018幎3月9日星期五 UTC+8䞊午3:31:33Shawn Peterman写道
Post by Shawn Peterman
When I press once it turns off the screen. If I don't press it
again within 2 seconds it reboots the machine.
Post by youling 257
if you press once power button to close screenlong press show
optionsthis no problem.
close screen auto rebootsuspend/resumes0i3 sleepthis other one
problem.
圚 2018幎3月9日星期五 UTC+8䞊午3:19:37Shawn Peterman写道
Post by Shawn Peterman
While I have your attention, any fix for the power button that
you know of?
Post by Shawn Peterman
Works flawlessly. Thank you again! I'll post the correct 49k in
my Howto thread.
Post by youling 257
use this bytcrrt5640.state and Jack-detect.sh.
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/U3Cp6RGzAAAJ
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/avHLzYTLAQAJ
https://groups.google.com/forum/#!searchin/android-x86/bytcrrt5640%7Csort:date/android-x86/n14kVAauPJ8/fzRxc7EkAwAJ
圚 2018幎3月8日星期四 UTC+8䞋午3:42:43Shawn Peterman写道
Post by Shawn Peterman
Just adding that state file I now have the speaker, mic and
headset. Unfortunately plugging in the headset does not turn off the
speaker.
Post by youling 257
the other one threadi said three method
1search found my bytcrrt5640.state fileit enable
speaker、in3 internal mic、headphone、headphone mic.
2copy Phoenix os bytcrrt5640.stateit just enable speaker
and headphone mic.
3run the three scriptthen alsa_ctl store bytcrrt5640 -f
/system/etc/alsa/bytcrrt5640.state.
圚 2018幎3月8日星期四 UTC+8䞋午2:42:38Shawn Peterman写道
Post by Shawn Peterman
It works. I couldn't get the one from the Phoenix OS copied.
It wouldn't recognize my USB ports or wifi on Live. I figured this would be
similar.
On Thursday, March 8, 2018 at 12:38:30 AM UTC-6, youling 257
Post by youling 257
no matter49 KB is utf/LF for (Linux/Android)52 KB is
utf8/CRLF for (Windows)jota+ app open them.
圚 2018幎3月8日星期四 UTC+8䞋午2:21:08Shawn Peterman写道
From your post.
https://groups.google.com/d/msg/android-x86/2Q6-JvAq0wY/n2yf2_q0AAAJ
On Thursday, March 8, 2018 at 12:16:28 AM UTC-6, youling
Post by youling 257
where you found the 52KB bytcrrt5640.state ?
圚 2018幎3月8日星期四 UTC+8䞋午12:43:14Shawn Peterman写道
Post by Shawn Peterman
Okay, what's that for?
On Wednesday, March 7, 2018 at 8:18:00 PM UTC-6, youling
Post by youling 257
edit system/etc/modules.blacklistdelete "deferred
soc_button_array".
圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
On Wednesday, March 7, 2018 at 12:17:17 PM UTC-6,
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy
PhoenixOS bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done
to get hardware like mine working! I found a thread where you said to copy
bytcrrt5640.state from Phoenix OS 2.5.9 iso and three scripts that you
wrote to bring the sound up. Great! I'm about to try it. When I get
bytcrrt5640.state, where do I put it to make it work? Will this work with
7.1 rc2 or do I need to install 7.1 r1?
On Wednesday, March 7, 2018 at 5:00:17 AM UTC-6,
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version
will work any better with the components on my machine (Nextbook Flexx 11)
than the most recent release candidate? Specifically, the sound,
microphone, power button, camera, screen rotation detection and screen
casting do not currently work with Android-x86 7.1-rc2 (Nougat-x86). Are
there updated mods in this release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Shawn Peterman
2018-03-14 17:58:12 UTC
Permalink
[ 68.571710] bytcr_rt5640 bytcr_rt5640: BIOS Routing: AIF1 connected
[ 68.571717] bytcr_rt5640 bytcr_rt5640: quirk IN1_MAP enabled
[ 68.571719] bytcr_rt5640 bytcr_rt5640: quirk DIFF_MIC enabled
[ 68.571721] bytcr_rt5640 bytcr_rt5640: quirk SSP0_AIF1 enabled
[ 68.571724] bytcr_rt5640 bytcr_rt5640: quirk MCLK_EN enabled
[ 68.577541] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai <->
media-cpu-dai mapping ok
[ 68.577610] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai <->
deepbuffer-cpu-dai mapping ok
[ 68.578186] bytcr_rt5640 bytcr_rt5640: rt5640-aif1 <-> ssp0-port mapping
ok
Post by youling 257
rebootalt+f1dmesg > /sdcard/dmesg.txtdmesg | grep 5640
do you know how to output dmesg ?
圚 2018幎3月15日星期四 UTC+8䞊午1:33:55Shawn Peterman写道
Post by Shawn Peterman
No output from 'dmesg | grep 5640'
Post by youling 257
Nextbook use IN3_MAP for internal micwhat's your dmesg | grep 5640 ?
https://github.com/burzumishi/linux-baytrail-flexx10/issues/7#issuecomment-261699684
圚 2018幎3月14日星期䞉 UTC+8䞋午11:51:24Shawn Peterman写道
Post by Shawn Peterman
If I could bother you with one more thing, the sound works now after
your help, but it's very quiet and the mic doesn't pick up well. On my
Linux systems with Alsa I just run sudo alsamixer from the CLI and set it
up. While I can find plenty of apps to boost speaker volume, none of them
have any adjustments for the mic. I'm guessing it has to do with
alsa_amixer but I'm not all that sure what to do. Any help?
Post by youling 257
echo freeze > /sys/power/state
圚 2018幎3月9日星期五 UTC+8䞊午4:16:14Shawn Peterman写道
Post by Shawn Peterman
'cat /sys/power/state' shows 'freeze'
Post by Shawn Peterman
Nothing at all happens...
Post by youling 257
echo mem > /sys/power/statewhat happen ?
圚 2018幎3月9日星期五 UTC+8䞊午3:31:33Shawn Peterman写道
Post by Shawn Peterman
When I press once it turns off the screen. If I don't press it
again within 2 seconds it reboots the machine.
Post by youling 257
if you press once power button to close screenlong press show
optionsthis no problem.
close screen auto rebootsuspend/resumes0i3 sleepthis other one
problem.
圚 2018幎3月9日星期五 UTC+8䞊午3:19:37Shawn Peterman写道
Post by Shawn Peterman
While I have your attention, any fix for the power button that
you know of?
Post by Shawn Peterman
Works flawlessly. Thank you again! I'll post the correct 49k in
my Howto thread.
Post by youling 257
use this bytcrrt5640.state and Jack-detect.sh.
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/U3Cp6RGzAAAJ
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/avHLzYTLAQAJ
https://groups.google.com/forum/#!searchin/android-x86/bytcrrt5640%7Csort:date/android-x86/n14kVAauPJ8/fzRxc7EkAwAJ
圚 2018幎3月8日星期四 UTC+8䞋午3:42:43Shawn Peterman写道
Post by Shawn Peterman
Just adding that state file I now have the speaker, mic and
headset. Unfortunately plugging in the headset does not turn off the
speaker.
On Thursday, March 8, 2018 at 12:55:34 AM UTC-6, youling 257
Post by youling 257
the other one threadi said three method
1search found my bytcrrt5640.state fileit enable
speaker、in3 internal mic、headphone、headphone mic.
2copy Phoenix os bytcrrt5640.stateit just enable speaker
and headphone mic.
3run the three scriptthen alsa_ctl store bytcrrt5640 -f
/system/etc/alsa/bytcrrt5640.state.
圚 2018幎3月8日星期四 UTC+8䞋午2:42:38Shawn Peterman写道
Post by Shawn Peterman
It works. I couldn't get the one from the Phoenix OS
copied. It wouldn't recognize my USB ports or wifi on Live. I figured this
would be similar.
On Thursday, March 8, 2018 at 12:38:30 AM UTC-6, youling
Post by youling 257
no matter49 KB is utf/LF for (Linux/Android)52 KB is
utf8/CRLF for (Windows)jota+ app open them.
圚 2018幎3月8日星期四 UTC+8䞋午2:21:08Shawn Peterman写道
From your post.
https://groups.google.com/d/msg/android-x86/2Q6-JvAq0wY/n2yf2_q0AAAJ
On Thursday, March 8, 2018 at 12:16:28 AM UTC-6, youling
Post by youling 257
where you found the 52KB bytcrrt5640.state ?
圚 2018幎3月8日星期四 UTC+8䞋午12:43:14Shawn Peterman写道
Post by Shawn Peterman
Okay, what's that for?
On Wednesday, March 7, 2018 at 8:18:00 PM UTC-6,
Post by youling 257
edit system/etc/modules.blacklistdelete "deferred
soc_button_array".
圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
On Wednesday, March 7, 2018 at 12:17:17 PM UTC-6,
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy
PhoenixOS bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've done
to get hardware like mine working! I found a thread where you said to copy
bytcrrt5640.state from Phoenix OS 2.5.9 iso and three scripts that you
wrote to bring the sound up. Great! I'm about to try it. When I get
bytcrrt5640.state, where do I put it to make it work? Will this work with
7.1 rc2 or do I need to install 7.1 r1?
On Wednesday, March 7, 2018 at 5:00:17 AM UTC-6,
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version
will work any better with the components on my machine (Nextbook Flexx 11)
than the most recent release candidate? Specifically, the sound,
microphone, power button, camera, screen rotation detection and screen
casting do not currently work with Android-x86 7.1-rc2 (Nougat-x86). Are
there updated mods in this release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2018-03-14 18:07:16 UTC
Permalink
if kernel parameter snd_soc_sst_bytcr_rt5640.quirk=0x500003 working on
4.9.80 7.1 r2 or cm14.1 r1you need edit android.cfgadd
snd_soc_sst_bytcr_rt5640.quirk=0x500003
ordo you know grub 2 press 'e' press F10 ?

圚 2018幎3月15日星期四 UTC+8䞊午1:58:12Shawn Peterman写道
Post by Shawn Peterman
[ 68.571710] bytcr_rt5640 bytcr_rt5640: BIOS Routing: AIF1 connected
[ 68.571717] bytcr_rt5640 bytcr_rt5640: quirk IN1_MAP enabled
[ 68.571719] bytcr_rt5640 bytcr_rt5640: quirk DIFF_MIC enabled
[ 68.571721] bytcr_rt5640 bytcr_rt5640: quirk SSP0_AIF1 enabled
[ 68.571724] bytcr_rt5640 bytcr_rt5640: quirk MCLK_EN enabled
[ 68.577541] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai <->
media-cpu-dai mapping ok
[ 68.577610] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai <->
deepbuffer-cpu-dai mapping ok
[ 68.578186] bytcr_rt5640 bytcr_rt5640: rt5640-aif1 <-> ssp0-port
mapping ok
Post by youling 257
rebootalt+f1dmesg > /sdcard/dmesg.txtdmesg | grep 5640
do you know how to output dmesg ?
圚 2018幎3月15日星期四 UTC+8䞊午1:33:55Shawn Peterman写道
Post by Shawn Peterman
No output from 'dmesg | grep 5640'
Post by youling 257
Nextbook use IN3_MAP for internal micwhat's your dmesg | grep 5640 ?
https://github.com/burzumishi/linux-baytrail-flexx10/issues/7#issuecomment-261699684
圚 2018幎3月14日星期䞉 UTC+8䞋午11:51:24Shawn Peterman写道
Post by Shawn Peterman
If I could bother you with one more thing, the sound works now after
your help, but it's very quiet and the mic doesn't pick up well. On my
Linux systems with Alsa I just run sudo alsamixer from the CLI and set it
up. While I can find plenty of apps to boost speaker volume, none of them
have any adjustments for the mic. I'm guessing it has to do with
alsa_amixer but I'm not all that sure what to do. Any help?
Post by youling 257
echo freeze > /sys/power/state
圚 2018幎3月9日星期五 UTC+8䞊午4:16:14Shawn Peterman写道
Post by Shawn Peterman
'cat /sys/power/state' shows 'freeze'
Post by Shawn Peterman
Nothing at all happens...
Post by youling 257
echo mem > /sys/power/statewhat happen ?
圚 2018幎3月9日星期五 UTC+8䞊午3:31:33Shawn Peterman写道
Post by Shawn Peterman
When I press once it turns off the screen. If I don't press it
again within 2 seconds it reboots the machine.
Post by youling 257
if you press once power button to close screenlong press show
optionsthis no problem.
close screen auto rebootsuspend/resumes0i3 sleepthis other
one problem.
圚 2018幎3月9日星期五 UTC+8䞊午3:19:37Shawn Peterman写道
Post by Shawn Peterman
While I have your attention, any fix for the power button that
you know of?
Post by Shawn Peterman
Works flawlessly. Thank you again! I'll post the correct 49k
in my Howto thread.
Post by youling 257
use this bytcrrt5640.state and Jack-detect.sh.
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/U3Cp6RGzAAAJ
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/avHLzYTLAQAJ
https://groups.google.com/forum/#!searchin/android-x86/bytcrrt5640%7Csort:date/android-x86/n14kVAauPJ8/fzRxc7EkAwAJ
圚 2018幎3月8日星期四 UTC+8䞋午3:42:43Shawn Peterman写道
Post by Shawn Peterman
Just adding that state file I now have the speaker, mic and
headset. Unfortunately plugging in the headset does not turn off the
speaker.
On Thursday, March 8, 2018 at 12:55:34 AM UTC-6, youling 257
Post by youling 257
the other one threadi said three method
1search found my bytcrrt5640.state fileit enable
speaker、in3 internal mic、headphone、headphone mic.
2copy Phoenix os bytcrrt5640.stateit just enable speaker
and headphone mic.
3run the three scriptthen alsa_ctl store bytcrrt5640 -f
/system/etc/alsa/bytcrrt5640.state.
圚 2018幎3月8日星期四 UTC+8䞋午2:42:38Shawn Peterman写道
Post by Shawn Peterman
It works. I couldn't get the one from the Phoenix OS
copied. It wouldn't recognize my USB ports or wifi on Live. I figured this
would be similar.
On Thursday, March 8, 2018 at 12:38:30 AM UTC-6, youling
Post by youling 257
no matter49 KB is utf/LF for (Linux/Android)52 KB is
utf8/CRLF for (Windows)jota+ app open them.
圚 2018幎3月8日星期四 UTC+8䞋午2:21:08Shawn Peterman写道
From your post.
https://groups.google.com/d/msg/android-x86/2Q6-JvAq0wY/n2yf2_q0AAAJ
On Thursday, March 8, 2018 at 12:16:28 AM UTC-6, youling
Post by youling 257
where you found the 52KB bytcrrt5640.state ?
圚 2018幎3月8日星期四 UTC+8䞋午12:43:14Shawn Peterman写道
Post by Shawn Peterman
Okay, what's that for?
On Wednesday, March 7, 2018 at 8:18:00 PM UTC-6,
Post by youling 257
edit system/etc/modules.blacklistdelete "deferred
soc_button_array".
圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
On Wednesday, March 7, 2018 at 12:17:17 PM UTC-6,
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy
PhoenixOS bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've
done to get hardware like mine working! I found a thread where you said to
copy bytcrrt5640.state from Phoenix OS 2.5.9 iso and three scripts that you
wrote to bring the sound up. Great! I'm about to try it. When I get
bytcrrt5640.state, where do I put it to make it work? Will this work with
7.1 rc2 or do I need to install 7.1 r1?
On Wednesday, March 7, 2018 at 5:00:17 AM UTC-6,
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this version
will work any better with the components on my machine (Nextbook Flexx 11)
than the most recent release candidate? Specifically, the sound,
microphone, power button, camera, screen rotation detection and screen
casting do not currently work with Android-x86 7.1-rc2 (Nougat-x86). Are
there updated mods in this release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Shawn Peterman
2018-03-14 18:21:03 UTC
Permalink
Thanks once again, I'll try that out!
Post by youling 257
if kernel parameter snd_soc_sst_bytcr_rt5640.quirk=0x500003 working on
4.9.80 7.1 r2 or cm14.1 r1you need edit android.cfgadd
snd_soc_sst_bytcr_rt5640.quirk=0x500003
ordo you know grub 2 press 'e' press F10 ?
圚 2018幎3月15日星期四 UTC+8䞊午1:58:12Shawn Peterman写道
Post by Shawn Peterman
[ 68.571710] bytcr_rt5640 bytcr_rt5640: BIOS Routing: AIF1 connected
[ 68.571717] bytcr_rt5640 bytcr_rt5640: quirk IN1_MAP enabled
[ 68.571719] bytcr_rt5640 bytcr_rt5640: quirk DIFF_MIC enabled
[ 68.571721] bytcr_rt5640 bytcr_rt5640: quirk SSP0_AIF1 enabled
[ 68.571724] bytcr_rt5640 bytcr_rt5640: quirk MCLK_EN enabled
[ 68.577541] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai <->
media-cpu-dai mapping ok
[ 68.577610] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai <->
deepbuffer-cpu-dai mapping ok
[ 68.578186] bytcr_rt5640 bytcr_rt5640: rt5640-aif1 <-> ssp0-port
mapping ok
Post by youling 257
rebootalt+f1dmesg > /sdcard/dmesg.txtdmesg | grep 5640
do you know how to output dmesg ?
圚 2018幎3月15日星期四 UTC+8䞊午1:33:55Shawn Peterman写道
Post by Shawn Peterman
No output from 'dmesg | grep 5640'
Post by youling 257
Nextbook use IN3_MAP for internal micwhat's your dmesg | grep 5640 ?
https://github.com/burzumishi/linux-baytrail-flexx10/issues/7#issuecomment-261699684
圚 2018幎3月14日星期䞉 UTC+8䞋午11:51:24Shawn Peterman写道
Post by Shawn Peterman
If I could bother you with one more thing, the sound works now after
your help, but it's very quiet and the mic doesn't pick up well. On my
Linux systems with Alsa I just run sudo alsamixer from the CLI and set it
up. While I can find plenty of apps to boost speaker volume, none of them
have any adjustments for the mic. I'm guessing it has to do with
alsa_amixer but I'm not all that sure what to do. Any help?
Post by youling 257
echo freeze > /sys/power/state
圚 2018幎3月9日星期五 UTC+8䞊午4:16:14Shawn Peterman写道
Post by Shawn Peterman
'cat /sys/power/state' shows 'freeze'
Post by Shawn Peterman
Nothing at all happens...
Post by youling 257
echo mem > /sys/power/statewhat happen ?
圚 2018幎3月9日星期五 UTC+8䞊午3:31:33Shawn Peterman写道
Post by Shawn Peterman
When I press once it turns off the screen. If I don't press it
again within 2 seconds it reboots the machine.
Post by youling 257
if you press once power button to close screenlong press show
optionsthis no problem.
close screen auto rebootsuspend/resumes0i3 sleepthis other
one problem.
圚 2018幎3月9日星期五 UTC+8䞊午3:19:37Shawn Peterman写道
Post by Shawn Peterman
While I have your attention, any fix for the power button that
you know of?
On Thursday, March 8, 2018 at 1:00:31 PM UTC-6, Shawn Peterman
Post by Shawn Peterman
Works flawlessly. Thank you again! I'll post the correct 49k
in my Howto thread.
On Thursday, March 8, 2018 at 2:11:00 AM UTC-6, youling 257
Post by youling 257
use this bytcrrt5640.state and Jack-detect.sh.
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/U3Cp6RGzAAAJ
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/avHLzYTLAQAJ
https://groups.google.com/forum/#!searchin/android-x86/bytcrrt5640%7Csort:date/android-x86/n14kVAauPJ8/fzRxc7EkAwAJ
圚 2018幎3月8日星期四 UTC+8䞋午3:42:43Shawn Peterman写道
Post by Shawn Peterman
Just adding that state file I now have the speaker, mic and
headset. Unfortunately plugging in the headset does not turn off the
speaker.
On Thursday, March 8, 2018 at 12:55:34 AM UTC-6, youling
Post by youling 257
the other one threadi said three method
1search found my bytcrrt5640.state fileit enable
speaker、in3 internal mic、headphone、headphone mic.
2copy Phoenix os bytcrrt5640.stateit just enable speaker
and headphone mic.
3run the three scriptthen alsa_ctl store bytcrrt5640 -f
/system/etc/alsa/bytcrrt5640.state.
圚 2018幎3月8日星期四 UTC+8䞋午2:42:38Shawn Peterman写道
Post by Shawn Peterman
It works. I couldn't get the one from the Phoenix OS
copied. It wouldn't recognize my USB ports or wifi on Live. I figured this
would be similar.
On Thursday, March 8, 2018 at 12:38:30 AM UTC-6, youling
Post by youling 257
no matter49 KB is utf/LF for (Linux/Android)52 KB is
utf8/CRLF for (Windows)jota+ app open them.
圚 2018幎3月8日星期四 UTC+8䞋午2:21:08Shawn Peterman写道
From your post.
https://groups.google.com/d/msg/android-x86/2Q6-JvAq0wY/n2yf2_q0AAAJ
On Thursday, March 8, 2018 at 12:16:28 AM UTC-6,
Post by youling 257
where you found the 52KB bytcrrt5640.state ?
圚 2018幎3月8日星期四 UTC+8䞋午12:43:14Shawn Peterman写道
Post by Shawn Peterman
Okay, what's that for?
On Wednesday, March 7, 2018 at 8:18:00 PM UTC-6,
Post by youling 257
edit system/etc/modules.blacklistdelete "deferred
soc_button_array".
圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
On Wednesday, March 7, 2018 at 12:17:17 PM UTC-6,
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy
PhoenixOS bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've
done to get hardware like mine working! I found a thread where you said to
copy bytcrrt5640.state from Phoenix OS 2.5.9 iso and three scripts that you
wrote to bring the sound up. Great! I'm about to try it. When I get
bytcrrt5640.state, where do I put it to make it work? Will this work with
7.1 rc2 or do I need to install 7.1 r1?
On Wednesday, March 7, 2018 at 5:00:17 AM UTC-6,
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this
version will work any better with the components on my machine (Nextbook
Flexx 11) than the most recent release candidate? Specifically, the sound,
microphone, power button, camera, screen rotation detection and screen
casting do not currently work with Android-x86 7.1-rc2 (Nougat-x86). Are
there updated mods in this release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Shawn Peterman
2018-03-14 18:48:54 UTC
Permalink
Where would I find 'android.cfg'?
Post by Shawn Peterman
Thanks once again, I'll try that out!
Post by youling 257
if kernel parameter snd_soc_sst_bytcr_rt5640.quirk=0x500003 working on
4.9.80 7.1 r2 or cm14.1 r1you need edit android.cfgadd
snd_soc_sst_bytcr_rt5640.quirk=0x500003
ordo you know grub 2 press 'e' press F10 ?
圚 2018幎3月15日星期四 UTC+8䞊午1:58:12Shawn Peterman写道
Post by Shawn Peterman
[ 68.571710] bytcr_rt5640 bytcr_rt5640: BIOS Routing: AIF1 connected
[ 68.571717] bytcr_rt5640 bytcr_rt5640: quirk IN1_MAP enabled
[ 68.571719] bytcr_rt5640 bytcr_rt5640: quirk DIFF_MIC enabled
[ 68.571721] bytcr_rt5640 bytcr_rt5640: quirk SSP0_AIF1 enabled
[ 68.571724] bytcr_rt5640 bytcr_rt5640: quirk MCLK_EN enabled
[ 68.577541] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai <->
media-cpu-dai mapping ok
[ 68.577610] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai <->
deepbuffer-cpu-dai mapping ok
[ 68.578186] bytcr_rt5640 bytcr_rt5640: rt5640-aif1 <-> ssp0-port
mapping ok
Post by youling 257
rebootalt+f1dmesg > /sdcard/dmesg.txtdmesg | grep 5640
do you know how to output dmesg ?
圚 2018幎3月15日星期四 UTC+8䞊午1:33:55Shawn Peterman写道
Post by Shawn Peterman
No output from 'dmesg | grep 5640'
Post by youling 257
Nextbook use IN3_MAP for internal micwhat's your dmesg | grep 5640 ?
https://github.com/burzumishi/linux-baytrail-flexx10/issues/7#issuecomment-261699684
圚 2018幎3月14日星期䞉 UTC+8䞋午11:51:24Shawn Peterman写道
Post by Shawn Peterman
If I could bother you with one more thing, the sound works now after
your help, but it's very quiet and the mic doesn't pick up well. On my
Linux systems with Alsa I just run sudo alsamixer from the CLI and set it
up. While I can find plenty of apps to boost speaker volume, none of them
have any adjustments for the mic. I'm guessing it has to do with
alsa_amixer but I'm not all that sure what to do. Any help?
Post by youling 257
echo freeze > /sys/power/state
圚 2018幎3月9日星期五 UTC+8䞊午4:16:14Shawn Peterman写道
Post by Shawn Peterman
'cat /sys/power/state' shows 'freeze'
Post by Shawn Peterman
Nothing at all happens...
Post by youling 257
echo mem > /sys/power/statewhat happen ?
圚 2018幎3月9日星期五 UTC+8䞊午3:31:33Shawn Peterman写道
Post by Shawn Peterman
When I press once it turns off the screen. If I don't press it
again within 2 seconds it reboots the machine.
Post by youling 257
if you press once power button to close screenlong press show
optionsthis no problem.
close screen auto rebootsuspend/resumes0i3 sleepthis other
one problem.
圚 2018幎3月9日星期五 UTC+8䞊午3:19:37Shawn Peterman写道
Post by Shawn Peterman
While I have your attention, any fix for the power button
that you know of?
On Thursday, March 8, 2018 at 1:00:31 PM UTC-6, Shawn
Post by Shawn Peterman
Works flawlessly. Thank you again! I'll post the correct 49k
in my Howto thread.
On Thursday, March 8, 2018 at 2:11:00 AM UTC-6, youling 257
Post by youling 257
use this bytcrrt5640.state and Jack-detect.sh.
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/U3Cp6RGzAAAJ
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/avHLzYTLAQAJ
https://groups.google.com/forum/#!searchin/android-x86/bytcrrt5640%7Csort:date/android-x86/n14kVAauPJ8/fzRxc7EkAwAJ
圚 2018幎3月8日星期四 UTC+8䞋午3:42:43Shawn Peterman写道
Post by Shawn Peterman
Just adding that state file I now have the speaker, mic
and headset. Unfortunately plugging in the headset does not turn off the
speaker.
On Thursday, March 8, 2018 at 12:55:34 AM UTC-6, youling
Post by youling 257
the other one threadi said three method
1search found my bytcrrt5640.state fileit enable
speaker、in3 internal mic、headphone、headphone mic.
2copy Phoenix os bytcrrt5640.stateit just enable
speaker and headphone mic.
3run the three scriptthen alsa_ctl store bytcrrt5640 -f
/system/etc/alsa/bytcrrt5640.state.
圚 2018幎3月8日星期四 UTC+8䞋午2:42:38Shawn Peterman写道
Post by Shawn Peterman
It works. I couldn't get the one from the Phoenix OS
copied. It wouldn't recognize my USB ports or wifi on Live. I figured this
would be similar.
On Thursday, March 8, 2018 at 12:38:30 AM UTC-6, youling
Post by youling 257
no matter49 KB is utf/LF for (Linux/Android)52 KB is
utf8/CRLF for (Windows)jota+ app open them.
圚 2018幎3月8日星期四 UTC+8䞋午2:21:08Shawn Peterman写道
From your post.
https://groups.google.com/d/msg/android-x86/2Q6-JvAq0wY/n2yf2_q0AAAJ
On Thursday, March 8, 2018 at 12:16:28 AM UTC-6,
Post by youling 257
where you found the 52KB bytcrrt5640.state ?
圚 2018幎3月8日星期四 UTC+8䞋午12:43:14Shawn Peterman写道
Post by Shawn Peterman
Okay, what's that for?
On Wednesday, March 7, 2018 at 8:18:00 PM UTC-6,
Post by youling 257
edit system/etc/modules.blacklistdelete "deferred
soc_button_array".
圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
On Wednesday, March 7, 2018 at 12:17:17 PM UTC-6,
Post by youling 257
delete Androidx86 etc/alsa/bytcrrt5640.statecopy
PhoenixOS bytcrrt5640.state to Androidx86 etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've
done to get hardware like mine working! I found a thread where you said to
copy bytcrrt5640.state from Phoenix OS 2.5.9 iso and three scripts that you
wrote to bring the sound up. Great! I'm about to try it. When I get
bytcrrt5640.state, where do I put it to make it work? Will this work with
7.1 rc2 or do I need to install 7.1 r1?
On Wednesday, March 7, 2018 at 5:00:17 AM UTC-6,
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this
version will work any better with the components on my machine (Nextbook
Flexx 11) than the most recent release candidate? Specifically, the sound,
microphone, power button, camera, screen rotation detection and screen
casting do not currently work with Android-x86 7.1-rc2 (Nougat-x86). Are
there updated mods in this release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2018-03-14 22:49:23 UTC
Permalink
please you google search grub2 press 'e'

圚 2018幎3月15日星期四 UTC+8䞊午2:48:54Shawn Peterman写道
Post by Shawn Peterman
Where would I find 'android.cfg'?
Post by Shawn Peterman
Thanks once again, I'll try that out!
Post by youling 257
if kernel parameter snd_soc_sst_bytcr_rt5640.quirk=0x500003 working on
4.9.80 7.1 r2 or cm14.1 r1you need edit android.cfgadd
snd_soc_sst_bytcr_rt5640.quirk=0x500003
ordo you know grub 2 press 'e' press F10 ?
圚 2018幎3月15日星期四 UTC+8䞊午1:58:12Shawn Peterman写道
Post by Shawn Peterman
[ 68.571710] bytcr_rt5640 bytcr_rt5640: BIOS Routing: AIF1 connected
[ 68.571717] bytcr_rt5640 bytcr_rt5640: quirk IN1_MAP enabled
[ 68.571719] bytcr_rt5640 bytcr_rt5640: quirk DIFF_MIC enabled
[ 68.571721] bytcr_rt5640 bytcr_rt5640: quirk SSP0_AIF1 enabled
[ 68.571724] bytcr_rt5640 bytcr_rt5640: quirk MCLK_EN enabled
[ 68.577541] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai <->
media-cpu-dai mapping ok
[ 68.577610] bytcr_rt5640 bytcr_rt5640: snd-soc-dummy-dai <->
deepbuffer-cpu-dai mapping ok
[ 68.578186] bytcr_rt5640 bytcr_rt5640: rt5640-aif1 <-> ssp0-port
mapping ok
Post by youling 257
rebootalt+f1dmesg > /sdcard/dmesg.txtdmesg | grep 5640
do you know how to output dmesg ?
圚 2018幎3月15日星期四 UTC+8䞊午1:33:55Shawn Peterman写道
Post by Shawn Peterman
No output from 'dmesg | grep 5640'
Post by youling 257
Nextbook use IN3_MAP for internal micwhat's your dmesg | grep 5640 ?
https://github.com/burzumishi/linux-baytrail-flexx10/issues/7#issuecomment-261699684
圚 2018幎3月14日星期䞉 UTC+8䞋午11:51:24Shawn Peterman写道
Post by Shawn Peterman
If I could bother you with one more thing, the sound works now
after your help, but it's very quiet and the mic doesn't pick up well. On
my Linux systems with Alsa I just run sudo alsamixer from the CLI and set
it up. While I can find plenty of apps to boost speaker volume, none of
them have any adjustments for the mic. I'm guessing it has to do with
alsa_amixer but I'm not all that sure what to do. Any help?
Post by youling 257
echo freeze > /sys/power/state
圚 2018幎3月9日星期五 UTC+8䞊午4:16:14Shawn Peterman写道
Post by Shawn Peterman
'cat /sys/power/state' shows 'freeze'
Post by Shawn Peterman
Nothing at all happens...
Post by youling 257
echo mem > /sys/power/statewhat happen ?
圚 2018幎3月9日星期五 UTC+8䞊午3:31:33Shawn Peterman写道
Post by Shawn Peterman
When I press once it turns off the screen. If I don't press it
again within 2 seconds it reboots the machine.
Post by youling 257
if you press once power button to close screenlong press
show optionsthis no problem.
close screen auto rebootsuspend/resumes0i3 sleepthis other
one problem.
圚 2018幎3月9日星期五 UTC+8䞊午3:19:37Shawn Peterman写道
Post by Shawn Peterman
While I have your attention, any fix for the power button
that you know of?
On Thursday, March 8, 2018 at 1:00:31 PM UTC-6, Shawn
Post by Shawn Peterman
Works flawlessly. Thank you again! I'll post the correct
49k in my Howto thread.
On Thursday, March 8, 2018 at 2:11:00 AM UTC-6, youling 257
Post by youling 257
use this bytcrrt5640.state and Jack-detect.sh.
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/U3Cp6RGzAAAJ
https://groups.google.com/d/msg/android-x86/L8Ga_bpA6BQ/avHLzYTLAQAJ
https://groups.google.com/forum/#!searchin/android-x86/bytcrrt5640%7Csort:date/android-x86/n14kVAauPJ8/fzRxc7EkAwAJ
圚 2018幎3月8日星期四 UTC+8䞋午3:42:43Shawn Peterman写道
Post by Shawn Peterman
Just adding that state file I now have the speaker, mic
and headset. Unfortunately plugging in the headset does not turn off the
speaker.
On Thursday, March 8, 2018 at 12:55:34 AM UTC-6, youling
Post by youling 257
the other one threadi said three method
1search found my bytcrrt5640.state fileit enable
speaker、in3 internal mic、headphone、headphone mic.
2copy Phoenix os bytcrrt5640.stateit just enable
speaker and headphone mic.
3run the three scriptthen alsa_ctl store bytcrrt5640
-f /system/etc/alsa/bytcrrt5640.state.
圚 2018幎3月8日星期四 UTC+8䞋午2:42:38Shawn Peterman写道
Post by Shawn Peterman
It works. I couldn't get the one from the Phoenix OS
copied. It wouldn't recognize my USB ports or wifi on Live. I figured this
would be similar.
On Thursday, March 8, 2018 at 12:38:30 AM UTC-6,
Post by youling 257
no matter49 KB is utf/LF for (Linux/Android)52 KB is
utf8/CRLF for (Windows)jota+ app open them.
圚 2018幎3月8日星期四 UTC+8䞋午2:21:08Shawn Peterman写道
From your post.
https://groups.google.com/d/msg/android-x86/2Q6-JvAq0wY/n2yf2_q0AAAJ
On Thursday, March 8, 2018 at 12:16:28 AM UTC-6,
Post by youling 257
where you found the 52KB bytcrrt5640.state ?
圚 2018幎3月8日星期四 UTC+8䞋午12:43:14Shawn Peterman写道
Post by Shawn Peterman
Okay, what's that for?
On Wednesday, March 7, 2018 at 8:18:00 PM UTC-6,
Post by youling 257
edit system/etc/modules.blacklistdelete "deferred
soc_button_array".
圚 2018幎3月8日星期四 UTC+8䞊午4:36:14Shawn Peterman写道
Post by Shawn Peterman
It works! You are a genius...
On Wednesday, March 7, 2018 at 12:17:17 PM UTC-6,
Post by youling 257
delete Androidx86
etc/alsa/bytcrrt5640.statecopy PhoenixOS bytcrrt5640.state to Androidx86
etc/alsa folder.
圚 2018幎3月8日星期四 UTC+8䞊午1:52:13Shawn Peterman写道
Post by Shawn Peterman
First of all THANK YOU for all the work you've
done to get hardware like mine working! I found a thread where you said to
copy bytcrrt5640.state from Phoenix OS 2.5.9 iso and three scripts that you
wrote to bring the sound up. Great! I'm about to try it. When I get
bytcrrt5640.state, where do I put it to make it work? Will this work with
7.1 rc2 or do I need to install 7.1 r1?
On Wednesday, March 7, 2018 at 5:00:17 AM
Post by youling 257
i said many timesbytcrrt5640.state.
i guess you must know rt5640 UCM HiFi.
圚 2018幎3月6日星期二 UTC+8䞊午8:51:52Shawn Peterman写道
Post by Shawn Peterman
Is there any reason to believe that this
version will work any better with the components on my machine (Nextbook
Flexx 11) than the most recent release candidate? Specifically, the sound,
microphone, power button, camera, screen rotation detection and screen
casting do not currently work with Android-x86 7.1-rc2 (Nougat-x86). Are
there updated mods in this release for my device?
Thanks!
Shawn
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Loading...